REXON DEA Description & Features Rugged full-height construction & high quality materials offer trouble-free reliable operation which are the hallmarks of the REXON-DEA turnstile. Ideally suited for high security applications where users are furnished a validation method such as a Proximity card, biometric ID or a similar token that can be read from a reader linked to an Access Control System. Anti-corrosive treatment to all surfaces and exposed components assures a lasting durable finish well suited for external installation conditions. With a modern exterior shell, available in a variety of color choices, the REXON-DEA is also a suitable attractive solution for interior applications as well exterior applications. The barrier bars are available in trombone (U-Shaped) as well as straight bars and are offset by 120° providing three rotating sections. A heavy duty motorized drive system and interlocking toothed brake are controlled by our purpose design/built ASIC microprocessor platform that controls the system and also provides multiple I/O interfaces choices at no additional cost including traditional relay contacts. REXON-DEA is offered with the following drive units: Motor drive unit (standard): REXON-DEA motorized turnstile version provides an easy to use system with high reliability and low cost of ownership • An effective and intuitive mechanical entry control system • Motor automatically adapts the rotation speed to the users • Offers a high level of safety features with redundancy • Virtually silent in operation - can be used in quite zones • Tunable final rotation phase adjustable to specific traffic Motor-driven unit is supplied in two variants: 1) FAIL - LOCK: Barrier locked during the power failure 2) FAIL - SAFE: Barrier freely rotates under power loss Mechanical unit (manual): • Enables setting for one-way passage • Entry in the opposite direction is mechanically blocked Mechanical turnstile is designed to regulate and control passage in one direction only and does not interface with any ACS System or reader. The mechanical unit also does not require any power supply input to function. TURNSTILE MATERIALS A N D S U R F A C E T R E A T M E N T : The turnstile is supplied in two barrier bar variations: REXON-DEA: straight stainless 1.6" dia. tube bars welded into a 4.25" center rotor column, available in grained or polished Stainless Steel REXON-DEA-U: Center rotor column clad with 18 gauge stainless steel sheet with 1" dia. Trombone shaped barrier bars (grained or polished) Frame: steel sheet, thickness 11 gauge, surface-finished: baked polyester powder coating (standard: RAL 9005 GS-black) Top and roof sides: steel sheet, thickness 16 gauge, surface-finished: baked polyester powder coating (standard: RAL 9005 GS-black) Fixed barrier bars: 1" dia. steel tube (standard: RAL 9005 GS-black) Other mechanical parts of turnstile are finished by galvanic zincing or blackening. Covers and roof: steel sheet, thickness 16 gauge, surface-finished: baked polyester powder coating (standard: RAL 5

Interface: Turnstile is controlled by our purpose design built ASIC board & microprocessor control unit equipped with various interfaces that offer numerous options for connecting input output signals all of them are galvanically isolated. • Operating I/O bus: Serial RS 485, USB or Ethernet (with external converter) traditional I/O relays also available • Configurable two-state turnstile status relay outputs • Motor control by digital power bridge with overload protection and current measurement • Generating log file with a list of all faults accompanied with time/date stamps • Remote firmware...