AXLE JACK Model 2265-10PR
2Pages

ColumbusJACK/Regent “The Strength of Experience” ISO 9001:2008 PRODUCT DATA SHEET ALLIGATOR AXLE JACK Model 2265-10PR, 65 Ton Capacity Standard Features  65 Ton Power RetractTM Cylinder Assembly with Spring Loaded Trailing Caster for support during towing  Single Valve Control for ease of operation  Dual Manual Hand Pumps (One High Pressure, Low Volume and one Low Pressure, High Volume)  Air Powered Pumping Unit  Nitrogen Charged Accumulator is used for Power Cylinder Ram Retraction  Double Pump Handle Assembly  Hydraulic Restrictor Valve slows and controls cylinder descent in the event of a hose failure  8” diameter Poly Tread Swivel Casters  Vented Filler Cap with Dip Stick  Hard Chrome Plated minimum .001 on a side of Cylinder and Ram Bores  Protective Cylinder Rain Cover  Skydrol Resistant Yellow Paint POWER RETRACTTM Operation and Maintenance Manual Certificate of Conformance Proof-load 150% of Rated Vertical Capacity Load Test Report Factory New - 12 Month Written Warranty Available Optional Equipment  Dual Reading Pressure Gauge Assembly (Reads in Tons/PSI) We invented the double-acting axle jack, now used worldwide for all normal axle jacking applications for both narrow and wide body aircraft. With 8-inch casters, these jacks are highly maneuverable and include both dual hand pumps and an air pump for ease of operation. Included is our "Power Retract" system that automatically powers the cylinder rams down once the jack release valve is opened. This permits faster removal of the jack from under the aircraft, and with complete ram retraction the cylinder is better protected. “POWER RETRACT” ALLIGATOR AXLE JACK SPECIFICATIONS VERTICAL CAPACITY MINIMUM HEIGHT HYDRAULIC LIFT SCREW EXTENSION MAXIMUM EXTENDED HEIGHT (Tons/m tonnes) 2222 S. Third Street Columbus, OH 43207 U.S.A. Tel: 614 443 7492 Fax: 614 444 9337 email: sales@columbus

ColumbusJACK/Regent “The Strength of Experience” ISO 9001:2008 ALLIGATOR AXLE JACK Model 2265-10PR, 65 Ton Capacity POWER - RETRACTTM 3/4” Female Spherical Radius B D Cylinder is raised and lowered by operating the Tow Bar to retract Wheel Assembly POWER RETRACTTM Nitrogen Charged Accumulator for Power Ram Retraction I F G OPTIONAL Dual Reading Pressure Gauge Assembly (Reads in Tons/PSI) Pump Handle - Stored “POWER RETRACT” ALLIGATOR AXLE JACK SPECIFICATIONS A VERTICAL CAPACITY (Tons/ m tonnes) MINIMUM CLOSED HEIGHT MAXIMUM WIDTH OF LENGTH EXT BASE OF BASE HEIGHT (Inches/mm) (Inches/mm)...