AVIATOR HGA-6500 Inmarsat Satcom High Gain Antenna Data Sheet The most important thing we build is trust Technical Specifications The HGA-6500 is a ruggedized mechanically steered Aero H/H+, Swift64 & SwiftBroadband Satcom Antenna. Derived from the successful HGA-6000, the HGA-6500 is specifically designed for external mount on helicopters and slower flying aircraft. The HGA-6500 accepts steering commands directly from any ARINC 741 compatible system. This eliminates the need to install a separate Antenna Control Unit (ACU) or Beam Steering Unit (BSU), reducing system box count, which in turn improves empennage weight distribution and installation simplicity. Smallest swept volume available for a mechanically steered high gain antenna Higher gain than single helix antenna designs Excess gain can be used for longer RF cable runs between antenna and DLNA Integral Beam Steeing Unit with ARINC 429 interface reduces overall box count Ruggedized and qualified for helicopter installation Externally mountable with fairing. No additional radome required ARINC 741/781 compatible Interfaces RF: TNC Male (Stand-Alone + Adaptor) Control: Multi-pin (Stand-Alone) or MXC Female (Stand-Alone) ARINC-741 (Adaptor) or SMA Female (Adaptor) Power: 28 Vdc (nominal) at 800 mA Qualification Stand-Alone DO 160E: [E1]XABE[R(EE1)S(LM)U(G)]EXXDFX ZAAR[CC][WW]H[A3E3X]3BAX With Adaptor DO 160E: [E1]XABE[R(EE1)S(LM)U(G)]ERFDFS ZAAR[CC][WW]H[A3E3X]3BAX Inmarsat Approvals Service coverage: 89.7% Type Approval: HGA-6500 High Gain Antenna SBB assessment: Multichannel 7th Order PIM AHCH01 18 September 2008 For further information, please contact: Cobham SATCOM, Cape Town High Power Amplifier Aircraft Navigation System Email: [email protected] Satellite Data Unit