morbidelli_m600-m800
28Pages

{{requestButtons}}

Catalog excerpts

morbidelli_m600-m800 - 1

morbidelli m600/m800 numerical controllled machining centres Casern woodworking technology

Open the catalog to page 1
morbidelli_m600-m800 - 2

morbidelli m600/800 numerical controlled machining centres THE SOLUTION THAT COMBINES QUALITY AND TECHNOLOGY Modular machining centres designed and developed to satisfy the requirements of furniture manufacturers.

Open the catalog to page 2
morbidelli_m600-m800 - 4

morbidelli m600/800 exclusive features MACHINING EFFICIENCY: MACHINING HEADS THAT SLIDE ON TWO INDEPENDENT “Z” AXIS Maximum rapidity during machining changeover with minimized idle times thanks to the double independent “Z” axis on which the two machining heads slide. The possibility to customise the two heads considerably increases the tools available to the operator. SUPERIOR TECHNOLOGY FOR MACHINING WITH 5 AXES: PRISMA ELECTROSPINDLE Reduced maintenance, maximum flexibility and optimal finishing quality with the BEL.TECH technology (Belt technology system), the belt transmission system...

Open the catalog to page 4
morbidelli_m600-m800 - 5

THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY: PHOTO-BUMPERS High production capacity and greater freedom of movement also during alternated work process due to the safety system that brings together the bumpers devices with the photocells for the detection of the operator's position inside the loading/unloading area. TOTAL LACK OF VIBRATIONS: MOBILE GANTRY STRUCTURE Performance without comparison with the mobile gantry structure that allows for high machining speeds whilst guaranteeing the best end products quality. UNIQUE CREATIVITY: XILOG MAESTRO CAD/CAM programming software to...

Open the catalog to page 5
morbidelli_m600-m800 - 6

morbidelli m600/800 machining unit: routing unit Vertical, horizontal, tilting machining and large dimensioned cuts with blade with 3-4-5 axes routing units up to 17 kW motor power. POWERFUL AND RELIABLE Ease-of-use and flexibility with the 5-axes machining unit, unique in its category in terms of performance. Wide range of specific electrospindles to carry out any type of machining. Prisma machining unit geometry allows it to operate at angles of up to 10° below the work piece supporting surface.

Open the catalog to page 6
morbidelli_m600-m800 - 7

High quality finish even on heavy machining with the exclusive TTS (Total Torque System) lock system, that provides the spindle with the stiffness of a 3-axes unit. Clean working environment with the conveyor facilitating removal of shavings and sawdust produced by machining.

Open the catalog to page 7
morbidelli_m600-m800 - 8

morbidelli m600/800 machining unit: drilling unit The higher drilling capacity in its category with 38 independent vertical spindles and 12 horizontal spindles, complete with blade unit and additional routing unit. INDESTRUCTIBLE AND WITH LOW MAINTENANCE The sturdiness of drilling heads is proven by the reduced maintenance costs: it is recommended only after more than 1000 hours of work. THE PERFECT DRILLING: RO.AX SPINDLE Zero play during machining with the new RO.AX technology (Rotoaxial spindle technology), the most efficient spindle on the market with rotation speeds up to 8000 rpm.

Open the catalog to page 8
morbidelli_m600-m800 - 9

Easy grooves machining on the sides of the furniture thanks to the integrated blade unit with 0-90° rotation. Higher efficiency and working time reduction with the additional routing unit (PBTC) with 12 kW electrospindle and Rapid 6-position tool changer to carry out the tool change in masked time.

Open the catalog to page 9
morbidelli_m600-m800 - 10

morbidelli m600/800 tool changers Wide range of tools available to the operator with the rear RAPID 16 or 24 positions tool changer. No idle time for the tool change from a machining process to another one with the RAPID 12 “on board” fitted directly on the machining unit. TR side tool changer with 10 or 12 positions

Open the catalog to page 10
morbidelli_m600-m800 - 11

morbidelli m600/800 machine management Mobile control panel with PC-Office Personal Computer with 17” LDC colour display that allows the programming directly on the machine. “ALL” AT YOUR FINGERTIPS: TECPAD CONTROL Management of machine controls with the 7” colour remote control with touch-screen function that facilitates and speed up the setting operations.

Open the catalog to page 11
morbidelli_m600-m800 - 12

morbidelli m600/800 bars work table SET UP TIMES IN MASKED TIME: TV MATIC WORK TABLE Work table with automatic simultaneous positioning of bars and suction cups or clamps. The requested configuration is performed in just a few seconds with a guaranteed safety against the risks of collision between tool and work table. Simple and quick substitution of suction cups or clamps through the exclusive rapid docking device. From a single panel can be obtained more elements and automatically re-position them to carry out all machining without interrupting the production cycle; at the end the work...

Open the catalog to page 12
morbidelli_m600-m800 - 13

TOTAL CUSTOMISATION: TV FLEXMATIC WORK TABLE This automatic table allows the management of a variable number of suction cups on the bar, according to the dimensions and shape of the work piece to be machined, in order to always have the best holding without risks of collision. Available also with manual version (TV FLEX). It is possible to position directly on each bar all necessary suction cups and clamps to lock the work pieces of any shape and dimension. Wide range of accessories, with variable height from 50 to 110 mm, to satisfy all machining necessities and available for all work...

Open the catalog to page 13
morbidelli_m600-m800 - 14

morbidelli m600/800 multi-function work table VERY HIGH FLEXIBILITY: MULTI-FUNCTION WORK TABLE Extremely stiff work table made of extruded aluminium, designed to maintain a perfect planarity over time, even after repeated mechanical stresses. It is ideal also for nesting machining.

Open the catalog to page 14
morbidelli_m600-m800 - 15

Optimal work piece holding with the high capacity vacuum up to 1000 m³/h. It is possible to fix custom references thanks to the exclusive “T-shaped” grooves available on the work table. Easy and quick positioning of locking accessories such as MPS suction cups and the practical MODULSET system with the surface channels structure. Possibility to work small work pieces with the coaxial mechanical presse

Open the catalog to page 15
morbidelli_m600-m800 - 16

morbidelli m600/800 loading/unloading automation Precise and rapid panels positioning on the work table with a dedicated suction cups system. Lifting table for the management of panels stacks with height up to 700 mm.

Open the catalog to page 16

All CMS SPA catalogs and technical brochures

  1. ikon

    7 Pages

  2. mx

    7 Pages

  3. MBB

    11 Pages

  4. POSEIDON

    12 Pages

  5. CRONUS

    9 Pages

  6. Dafa_EN

    9 Pages

  7. Idroline S

    13 Pages

  8. ATOM

    7 Pages