DYNACIATPOWER
DYNACIATPOWER
The document outlines the technical specifications for the DYNACIAT POWER series, focusing on medium temperature process chillers. It includes details on model types, operating conditions, and performance metrics as per EU Regulation 2015/1095.
The Seasonal Energy Performance Ratio (SEPR) and annual electricity consumption are specified for different models. For example, the DYNACIAT POWER LG-LGP 700V model has an SEPR of 3.99 kWh/kWh and an annual electricity consumption of 231,375 kWh.
Operating temperatures are specified for components like outdoor and indoor heat exchangers, with water temperatures at 30°C/35°C and brine medium temperatures at -2°C/-8°C.
The refrigerant used is R410A, with a Global Warming Potential (GWP) of 2088 kg CO2 equivalent over 100 years.
Details on rated cooling capacity and power input at different rating points are provided. For instance, at point A, the rated cooling capacity is 125.41 kW with a power input of 45.77 kW, and a degradation coefficient of 1.
The document mentions variable capacity control and the use of ethylene glycol with a concentration of 40% as the fluid type.
For further details, CIAT can be contacted at Avenue Jean Falconnier BP 14 - 01350 Culoz, France.
Performance metrics comply with Regulation (EU) 2015/1095. SEPR values range from 4.56 kWh/kWh to 4.69 kWh/kWh, and annual electricity consumption ranges from 513,358 kWh to 6,723,230 kWh.
For fixed staged capacity units, if not determined by measurement, the default degradation coefficient is Cc = 0.9. If this default value is chosen, cycling test results are not required; otherwise, they are mandatory.
Capacity control is variable. CIAT reserves the right to make technical modifications without notice.
Catalog excerpts
POWER DYNACIAT TECHNICAL DATA MANUAL
Open the catalog to page 1
DYNACIAT POWER Degradation coefficient for fixed staged capacity units [17](*) CIAT - Avenue Jean Falconnier BP 14 - 01350 Culoz - FRANCE (*) If Cc is not determined by measurement then the default degradation coefficient shall be Cc = 0,9, Where the default Cc value is chosen, then results from cycling tests shall not be required. Otherwise, the cooling cycling test value shall be required. Contact details Glycol type and concentration [26] Evap,Fluid Type: Ethylene Glycol Concentration: 30 % [27] Degradation coefficient for fixed staged capacity units [17](*) Other items Declared power input...
Open the catalog to page 2
[1] Modèle [2] Échangeur côté extérieur [3] Eau 30°C / 35°C [4] Échangeur côté intérieur [5] Eau glycolée Moyenne température - 2°C / -8°C [6] Type de fluide frigorigène [7] Élément [8] Symbole [9] Valeur [10] Unité [11] Température de fonctionnement [12] Coefficient d'efficacité énergétique saisonnier [13] Consommation annuelle d’électricité [14] Paramètres à pleine charge et à la température ambiante de référence, point (A) [15] Puissance frigorifique nominale [16] Puissance absorbée nominale [17] Coefficient de dégradation pour les unités à puissance étagée fixe(*) [18] EER nominal [19] Paramètres...
Open the catalog to page 3
[1] Modell(er) [2] Värmeväxlare på utomhussidan [3] Vatten 30°C / 35°C [4] Värmeväxlare på inomhussidan [5] Brine Låg temperatur -2°C / -8°C [6] köldmedietyp [7] Funktion [8] Symbol [9] Värde [10] Enhet [11] Driftstemperatur [12] Årstidsberoende energiprestanda [13] Årlig elförbrukning [14] Parametrar vid full belastning och referensomgivnings-T, punkt (A) [15] Angiven kylkapacitet [16] Nominell tillförd effekt [17] Degraderingskoefficient för enheter med fast och stegvis kapacitet(*) [18] Energieffektivitetskvot [19] Parametrar vid bedömningspunkt B [20] Deklarerad kylkapacitet [21] Deklarerad...
Open the catalog to page 4
Degradation coefficient for fixed staged capacity units(*) Declared power input Degradation coefficient for fixed staged capacity units(*) CIAT - Avenue Jean Falconnier BP 14 - 01350 Culoz - FRANCE (*) If Cc is not determined by measurement then the default degradation coefficient shall be Cc = 0,9, Where the default Cc value is chosen, then results from cycling tests shall not be required. Otherwise, the cooling cycling test value shall be required. Contact details Glycol type and concentration Capacity control Evap,Fluid Type: Ethylene Glycol Concentration: 40 % Declared power input Other items...
Open the catalog to page 10
Compagnie Industrielle d'Applications Thermiques S.A. au capital de 26 728 480 € R.C.S. Bourg-en-Bresse B 545.620.114 CIAT Service Tel, : 08 11 65 98 98 - Fax : 08 26 10 13 63 (0,15 € / mn) Non-contractual document, With the thought of material improvement always in mind, CIAT reserves the right, without notice to proceed with any technical modification, 6Avec Ecofolio srs tous les papiers se recyclent.
Open the catalog to page 11All CIAT catalogs and technical brochures
AQUACIAT / AQUACIATPOWER12 Pages
GeoCIAT™ Modular6 Pages
