Multiflutes cutters - Helix 45°
1 / 1 PageView full catalog
Multiflutes cutters - Helix 45°
Product catalog summary
Multiflutes Cutters Overview
This document provides technical specifications for multiflutes cutters with a 45° helix angle, designed for use with hardened steels. These cutters are part of an internal standard and are suitable for steel materials with hardness ranging from 44 to 67 HRC.
Specifications
Dimensions and Codes
The document lists various dimensions and corresponding product codes for the cutters. Key dimensions include diameter (Dc), length (L1, L2, L3), and number of flutes (Z). Each cutter has a specific code for both coated and uncoated versions.
Application and Limitations
This document provides technical specifications for multiflutes cutters with a 45° helix angle, designed for use with hardened steels. These cutters are part of an internal standard and are suitable for steel materials with hardness ranging from 44 to 67 HRC.
Specifications
- Material: Steels (C3.2-3.5)
- Hardness: 44-67 HRC
- Coating: Cutters are provided for own coating and are not suitable without an adapted coating.
- Material Grade: HM CK10-30-UF Ultrafine
Dimensions and Codes
The document lists various dimensions and corresponding product codes for the cutters. Key dimensions include diameter (Dc), length (L1, L2, L3), and number of flutes (Z). Each cutter has a specific code for both coated and uncoated versions.
Application and Limitations
- These cutters are specifically designed for hardened steels and require appropriate coating for effective use.
- Working parameters for these cutters are detailed on pages 81-92 of the document.
See more
Catalog excerpts
Mehrschneidenfraser - Drall 45° - WN - fur gehartete Stahle Multiflutes cutters - Helix 45° - Internal standard - for hardened steels Einsatzgebiete / Range of application C:Stahlwerkstoffe / Steels C3.2-3.5 □ zur Eigenbeschichtung vorgesehen - ohne geeignete Beschichtung nicht einsetzbar. □ provided for own coating. Not suitable without adapted coating. Fur Arbeitsparameter siehe Seite 81-92 For working-parameters see page 81-92
Open the catalog to page 1All CERIN SpA catalogs and technical brochures
THE QUALITY OF EXPERIENCE276 Pages
Tagliente6 Pages
Aerospace68 Pages
642 / 642F1 Page
640WT2 Pages
640WS1 Page
3031 Page
102TC/TCL1 Page
68RDX1 Page
68TD1 Page
68SX1 Page
419TD1 Page
104PH1 Page
68DX1 Page
178 30XD21 Pages
178 25XD21 Pages
178 20XD21 Pages
178 12XD21 Pages
178 8XD21 Pages
178 5XD21 Pages
178 3XD21 Pages
16521 Pages
165ST4 Pages
165C1 Page
1181 Page
2171 Page
HPC Shark Line Catalogue12 Pages
Reamers Catalogue14 Pages
Cylindrical Radius End1 Page
Cylindrical with End Cut1 Page
Star drills straight flute2 Pages
2 straight flute drills1 Page
Drills for KEVLAR1 Page
Related Searches
- Aeronautic milling cutter
- Metal milling cutter
- Aeronautic drill bit
- Solid drill bit
- Metal drill bit
- Diamond milling cutter
- PCD milling cutter
- Composite milling cutter
- Steel milling cutter
- Plastic drill bit
- CFRP milling cutter
- Titanium milling cutter
- CFRP drill bit
- Corner radius milling cutter
- Aluminum drill bit
- Plastic milling cutter
- Ball nose milling cutter
- Nickel alloy milling cutter
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.