Specifications:
The document provides cutting data for end mills and ball nose cutters with Cer-D (Diamond) coating. It includes specifications for cross cut and fine cut with chip breaker (66GF-D). The tools are designed for various milling operations such as side-contour milling, slot milling, and copy milling.

Procedures:
The document outlines the procedures for using these tools in different milling operations. It specifies the depth of cut (ap) and width of cut (ae) as fractions of the cutter diameter (Dc).

Cutting Parameters:
The cutting parameters are provided for different cutter diameters ranging from 2.00 mm to 20.00 mm. The feed rates (f) are specified for both roughing and finishing operations across various milling types.

Key Data:
- For a 2.00 mm cutter, the feed rate is 0.12 mm for roughing and 0.10 mm for finishing.
- For a 10.00 mm cutter, the feed rate is 0.50 mm for roughing and 0.36 mm for finishing.
- For a 20.00 mm cutter, the feed rate is 1.00 mm for roughing and 0.60 mm for finishing.

Recommendations:
The document recommends using the specified parameters to achieve optimal performance and tool life. It emphasizes the importance of adhering to the specified feed rates and cutting depths for different operations.