ED-510XL

ED-510XL

ED-510XL

Product catalog summary
Overview: The ED-510XL is a portable, hand-held eddy current flaw detector designed for detecting flaws in metal parts and sorting metals by alloy type. It is characterized by its simplicity, solid-state design, and variable frequency range.
Key Features:
  • Simplicity of Operation: Allows for quick scanning.
  • Solid State Design: Integrated circuitry ensures reliable detection.
  • Frequency Range: Operates between 140KHz to 200KHz.
  • Flaw Detection: Effective in both magnetic and non-magnetic materials.
  • Power Source: Operates on a single 9-volt alkaline battery with a life of 4 to 8 hours.
  • Interchangeable Probes: Compatible with probes from ED-520 and ED-530, or custom-designed probes.
  • Sensitivity Standard: Includes milled slots of 0.008", 0.020", and 0.040" for sensitivity calibration.
Applications: The ED-510XL is suitable for testing defects in airframe and engine components, welding inspection, and various sorting applications. It can also compare relative coating thickness and conductivity to known standards.
Operation: The device measures changes in the chemical composition of test parts by detecting eddy current imbalances caused by variations such as cracks or density changes. The front panel meter provides a visual interpretation of these flaws.
Controls and Components:
  • Lift-off Control: Adjusts frequency for lift-off compensation.
  • Balance Control: Adapts the probe to the bridge circuit and positions the meter pointer.
  • Power Switch: Powers the instrument; battery access is on the back.
  • Sensitivity Control: Sets the sensitivity level, with maximum sensitivity achieved when fully up.
Specifications:
  • Dimensions: 3.5" wide x 7.1" long x 1.9" deep; carrying case 8" x 8" x 3.5".
  • Weight: 0.8 lb (0.04kg); with carrying case 2.2 lbs (1kg).
  • Readout: Square meter, 2.5" wide; scale numbered from 0 to 500 in 50 divisions.
Copyright: © 2000 - 2010 Centurion NDT. All rights reserved.
See more

Catalog excerpts

ED-510XL-1

ED-510XL Hand Held Flaw Detector Special Features The ED-510XL is a hand-held eddy current instrument which accurately detects flaws in metal parts and can sort metals by alloy type. In addition to the versatility of being hand-held, the ED-510XL also features: • • • • • • • Simplicity of operation, for quick scanning Solid state design, with integrated circuitry for reliable detection Variable frequency range of 140KHz to 200KHz Superior flaw detection in magnetic and non-magnetic materials Power is provided by a single 9-volt alkaline battery (battery life is 4 to 8 hours depending on use) Interchangeable probes including absolute probes from the ED-520 and ED-530, or special probes designed for your application A sensitivity standard with 0.008", 0.020", and 0.040" milled slots Applications The ED-510XL is a hand-held, portable unit which offers high sensitivity, versatility and simplicity in operation. It will locate surface and near-surface flaws in non-magnetic materials as well as surface defects in magnetic materials where permeability is relatively constant throughout the test area. The ED-510XL will sort materials according to such properties as hardness, alloy type, carbon content, heat treat condition, tensile strength and grain structure based on changes in magnetic and electrical characteristics. The ED-510XL is ideal in testing for defects in airframe and engine components, welding inspection, and various sorting applications. In addition, the ED-510XL can compare the relative coating thickness and relative conductivity to a known tes

 Open the catalog to page 1
ED-510XL-2

Operation The ED-510XL instrument accurately measures the changes in chemical make-up of the test part when the eddy currents induced through the probe are affected by changes in the test part characteristics. When the probe passes over a variation in the metal, (a crack, thickness or density variation,) it creates an eddy current imbalance in the coil of the probe, and sends a signal to the front panel meter. The meter gives a visual interpretation of the flaw. Description The instrument comes with a medium frequency, short pencil probe and an aluminum flaw sensitivity test block. The front...

 Open the catalog to page 2

All Centurion Test Equipment catalogs and technical brochures

  1. PS-710V

    2  Pages

  2. PS-710B

    2  Pages

  3. ED-810

    2  Pages

  4. ED-520Me

    3  Pages

  5. ED-400M

    3  Pages

  6. ED-400

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.