SALTO SALLIS
2Pages

CEM SYSTEMS From Tyco Security Products Wireless Lock Features that make a difference: • Seamless integration to the CEM AC2000 System • Cost effective solution for wireless doors • Real-time transactions & Alarm events displayed within AC2000 • Flexible design that can be fitted to almost any door (Narrow Profile, aluminium doors, heavy duty doors, panic bars, glass doors etc) • Secure communication between lock and node via 2.4Ghz 802.15.5 with an AES 128bits encryption • Support for a Mifare/DESfire smart card technologies The AC2000 SALTO SALLIS wireless lock integration offers a seamless interface to the CEM AC2000 system, allowing for up to 64 doors to be controlled wirelessly through a single SALLIS Router. Using the SALTO SALLIS solution a user can badge their credentials at a SALTO SALLIS lock. The lock will then send the relevant information to the SALTO wireless Nodes. The information sent from these nodes will be routed to the AC2000 Access Control System through a Salto Router. The AC2000 System will then take the decision based on the information received and the access control rights. The result will be sent back to the SALLIS Locks through the SALTO SALLIS Infrastructure and the user will be granted or denied access by the locks accordingly in Real-Time. The SALTO SALLIS Wireless solution offers a cost effective technology that can dramatically reduce installation costs and allows for greater flexibility. The SALTO SALLIS wireless locks can be installed on almost any type of door ranging from narrow profile, aluminum doors, heavy duty doors, panic bars, and glass doors to name a few. The use of wireless communication also increases the security of your access control system by providing real-time information to and from the door. Lock Features • Wireless radio frequency based on IEEE 802.15.4@2.4Ghz • AES 128 bits encryption • Card technologies available: Mifare/DESfire • Battery powered (3 standard AAA batteries or 3 AA batteries depending on the model) • Firmware updated via PDD • 600 event audit trail back up • Clutch mechanism escutcheon when unlocked handle moves free • Door thickness compatibility: 30mm to 115mm • Square Spindles available: 7mm, 7.6mm split, 8mm, 8mm split, 9mm & 9mm split • IP45 Compliant • EN1634-1 EL160 Fire Resistant • UL 10C Compliant (90min wooden doors. Router Features • Wireless radio frequency based on IEEE 802.15.4@2.4Ghz • Connection to AC2000 Real Time Controller through TCP/IP • Voltage required 12V • Can manage up to 7 nodes and a maximum of 64 Door Locks

CEM SYSTEMS From Tyco Security Products Ordering Information Node Features • Wireless radio frequency based on IEEE 802.15.4@2.4Ghz • Connection to SALLIS Router through RS485 comms • Can manage up to 16 locks www.cemsys.com © 2015 Tyco Security Products. All Rights Reserved. CEM/B/137 Rev C Tyco and the product names listed above are marks and/or registered marks. Unauthorized use is strictly prohibited. Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region;...