S700s
3Pages

Intelligent card reader designed for use as part of the CEM Systems AC2000 access control software range Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Integral reading support for 13.56 MHz smart card and 125 kHz proximity technology Communicates with the host server via ECM, removing the need for an intelligent control panel in the system design Large reader database for offline card verification and alarms Large graphical LCD which is used to display a number of predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Remote programming facility to download updated firmware Weather-proof casing: IP65-rated Easy to install The S700s Card Reader is the next generation fully integrated combined serial card reader and controller, designed for use with AC2000 as part of an integrated on-line access control system. The S700s can be deployed to control access to restricted areas or in special applications where card activation of equipment is required. Using a powerful 32-bit processor, the S700s serial reader gives full off-line card verification and decision making at the point of entry, even when host communication is not available. Exit reader options include a twinned S700 Exit reader, push button or a third party Wiegand exit read head for IN/OUT control. The IP65-rated polycarbonate enclosure houses the reader electronics and comes with a large 4x3 capacitive light touch keypad, graphical display screen, context sensitive function keys, and high intensity multi-colour LED light bar. The S700s serial reader has four analogue inputs (voltage supplied), which can be used to monitor door and alarm conditions for transmission to the host server. All four inputs are four state (tamper detect) capable. Two outputs are also fitted to control the activation of door locks or other equipment. On-board Card Reading Technology Designed to support 13.56 MHz smart card technology (MIFARE® (CSN), DESFire® (CSN), CEM DESFire 3DES, CEM DESFire AES, iCLASS, iCLASS SE, PicoPass) and 125 kHz HID® proximity technology. A single Wiegand interface is also provided to connect third party readers. Offline Operation A full offline database is downloaded to the reader from the host server with subsequent changes to cardholder data automatically sent as updates. This ensures the reader has up-to-date card information when operating in offline mode. Alarms and transactions are recorded in offline mode are passed automatically to the AC2000 system when reader communications are re-established. This ensures zero downtime at system critical locations. Reader Messages The S700s has an easy to read large 2.4 inch graphical LCD which is used to display a number of predefined messages to cardholders depending on their privileges e.g. Wrong Zone, Lost/ Stolen Card, Card About to Expire, Access Granted and many more. Host Communications The S700s has an RS-485 serial port allowing it to communicate with the host AC2000 controller, removing the need for an additional intelligent control panel in the system design. Easy to Install The S700s is designed to be extremely easy to install. The installer simply configures the reader address on the AC2000 software and applies the same reader address to the S700s. The S700s is then provided with power and the reader self-configures by means of downloading data from the host.

Proximity to Smart Card Migration The S700s serial multi-tech version supports the simultaneous reading of traditional Proximity cards with either MIFARE, MIFARE DESFire or iCLASS SE smart cards. This provides existing sites using proximity cards a seamless path to migrate to a more secure smart card solution with zero system downtime and with no effect on security. Once migrated, smart cards can then be used for other applications such as cashless vending, biometric storage, logical access and much more. The S700s is the perfect migration tool, allowing a seamless, cost-effective...

CEM SYSTEMS From Tyco Security Products Database Size in Off-line Mode Requirements • AC2000 v7.1 and higher • AC2000 Airport v7.1 and higher • AC2000 Lite v7.1 and higher • Ethernet Communications Module (ECM) • RTC Ethernet reader controller To order contact cem.sales@tycoint.com or call +44(0) 2890 456 767 Related Products AC2000 AC2000 Airport AC2000 Lite www.cemsys.com © 2017 Tyco Security Products. All Rights Reserved. CEM/B/177 Tyco and the product names listed above are marks and/or registered marks. Unauthorized use is strictly prohibited. Product offerings and specifications are...