Security | Access | Video | Intrusion | Converged Solutions | Services Data Sheet Combined Multi-Technology Intelligent Serial Reader and Controller Intelligent card reader designed for use as part of the CEM Systems AC2000 access control software range Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication Integral reading support for 13.56 MHz smart card and 125 kHz proximity technology Communicates with the host server via ECM, removing the need for an intelligent control panel in the system design Large reader database for offline card verification and alarms Large graphical LCD which is used to display a number of predefined messages Four analogue inputs to monitor door or alarm conditions Two changeover relay outputs to activate door strike or other equipment Remote programming facility to download updated firmware Weather-proof casing: IP65rated Easy to install The power behind your mission The S700s Card Reader is the next generation fully integrated combined serial card reader and controller, designed for use with AC2000 as part of an integrated on-line access control system. The S700s can be deployed to control access to restricted areas or in special applications where card activation of equipment is required. Using a powerful 32-bit processor, the S700s serial reader gives full off-line card verification and decision making at the point of entry, even when host communication is not available. Exit reader options include a twinned S700 Exit reader, push button or a third party Wiegand exit read head for IN/OUT control. The IP65-rated polycarbonate enclosure houses the reader electronics and comes with a large 4x3 capacitive light touch keypad, graphical display screen, context sensitive function keys, and high intensity multi-colour LED light bar. The S700s serial reader has four analogue inputs (voltage supplied), which can be used to monitor door and alarm conditions for transmission to the host server. All four inputs are four state (tamper detect) capable. Two outputs are also fitted to control the activation of door locks or other equipment. Host Communications The S700s has an RS-485 serial port allowing it to communicate with the host AC2000 controller, removing the need for an additional intelligent control panel in the system design. On-board Card Reading Technology Designed to support 13.56 MHz smart card technology (MIFARE® (CSN), DESFire® (CSN), CEM DESFire 3DES, CEM DESFire AES, iCLASS, iCLASS SE, PicoPass) and 125 kHz HID® proximity technology. A single Wiegand interface is also provided to connec

Offline Operation A full offline database is downloaded to the reader from the host server with subsequent changes to cardholder data automatically sent as updates. This ensures the reader has up-to-date card information when operating in offline mode. Alarms and transactions are recorded in offline mode are passed automatically to the AC2000 system when reader communications are re-established. This ensures zero downtime at system critical locations. Reader Messages The S700s has an easy to read large 2.4 inch graphical LCD which is used to display a number of predefined messages to cardholders...

Examples of Graphical Messages Agency Certifications FCC Part 15, CE The power behind your mission Johnson 4 Controls

• Ethernet Communications Module (ECM) • RTC Ethernet reader controller Product Code Description S700s Card Reader with PIN (125 kHz HID Prox and 13.56 MHz iCLASS SE) S700s Card Reader with PIN (125 kHz HID Prox and 13.56 MHz MIFARE/DESFire) S700s PicoPass Reader with PIN S700s Card Reader with PIN (13.56 MHz MIFARE/DESFire) S700s Card Reader with PIN (13.56 MHz iCLASS SE) To order contact [email protected] or call +44(0) 2890 456 767 About Johnson Controls Johnson Controls is a global diversified technology and multi-industrial leader serving a wide range of customers in more than 150 countries....