1. Catalogs
  2. CEM Systems
  3. S610f Fingerprint Reader

S610f Fingerprint Reader

S610f Fingerprint Reader

S610f Fingerprint Reader

Product catalog summary
Overview: The S610f Fingerprint Reader is a fully integrated biometric and access control solution designed for use with the AC2000 access control system. It provides enhanced security for restricted areas by combining card, PIN, and biometric verification in one device.
Key Features:
  • Fast card and fingerprint verification with 1:1 fingerprint match at the door.
  • Secure storage of fingerprint data using RC4 encryption on both the central server and the S610f internal database.
  • Utilizes Suprema Fingerprint module for high-resolution scans, exceeding FBI requirements and FIPS201 certification.
  • Supports multiple card technologies including Proximity, Mifare, iClass, DESFire, and dual technology (Prox/Mifare).
  • Fast fingerprint enrollment and connection over 10/100 Mbps Ethernet, eliminating the need for an intelligent controller.
  • Structured database for storing large amounts of cardholder records for offline validation.
  • Includes a keypad for configuration and optional PIN entry.
  • Four analog inputs for monitoring alarm conditions and two relay outputs for controlling door strikes or other equipment.
Technical Specifications:
  • Physical dimensions: 190 x 120 x 44mm, weight: 590g.
  • Power requirements: 9-14Vdc, current consumption: 260mA (passive), 470mA (peak).
  • Environmental: IP30 rating, operating temperature: 0° to 55°C.
  • Memory: 2 MB battery-backed memory, optional 128 MB Compact Flash.
  • Database capacity: Up to 123,000 cardholders with two fingerprint templates per cardholder.
  • Communication: 10/100 Base-T TCP/IP using CAT5 cable, RJ45 connection.
Functionality: The S610f supports offline card validation, displaying predefined messages on a large graphical LCD. It can operate in various modes such as Door Access, Passenger, Turnstile, Verification, and Control Post.
Requirements: Compatible with AC2000 v5.7 and upwards, AC2000 Lite v6 and upwards, and AC2000 Airport v6.6 and upwards.
Ordering Information: Various product codes are available for different configurations, including HID Prox, Dual Tech (Prox/Mifare), MiFare, HID iClass SE, and DESFire.
See more

Catalog excerpts

S610f Fingerprint Reader-1

S610f Fingerprint Reader Fully Integrated Biometric Solution Features that make a difference: • Fast card and fingerprint verification, uses 1:1 fingerprint match at the door Secure storage of fingerprint on the central access control server and the S610f internal database using RC4 encryption Uses Suprema Fingerprint module giving a high resolution scan. Detects conductivity of the living tissue beneath the skin. Exceeds FBI requirements and is FIPS201 certified The S610f Card and Fingerprint Reader is a fully integrated biometric and access control Reader. Used as part of the AC2000 access control system, the S610f controls access to restricted areas where an additional biometric layer of security is required. Fully integrated biometrics & access control solution The S610f features a controller, advanced IP card reader and industry leading Suprema fingerprint module all in one device. • Integral reading technology for Proximity, Mifare, iClass, DESFire and dual technology (Prox/Mifare) • Fast fingerprint enrollment and connection over 10/100 Mbps Ethernet, no need for an intelligent controller in the system design • Structured database allows storage of large amounts of cardholder records for off-line card validation • Keypad for configuration and optional Personnel Identification Number (PIN) • 4 analog inputs to monitor alarm conditions and 2 changeover relay outputs to activate door strike or other equipment The reader, has on-board 10/100Mbps Ethernet and communicates directly with the AC2000 host server removing the need for an intelligent control panel in the system design. Featuring a controller, advanced IP card reader and single biometric solution all in one, the S610f fingerprint reader meets requirements for three stage identity authentication (card, PIN, and biometric verification) using one device. Using a powerful 32bit processor and a large internal database, the S610f gives full off-line card validation and biometric verification decision at the door, even when host communication is not available. Designed for use with all card technologies the S610f device is available with integral reading support for 125 kHz HID Proximity or 13.56 MHz MiFare and iClass, DESFire and dual technology (Prox/Mifare). The IP30 rated (indoor use) polycarbonate enclosure houses the reader electronics and comes with a large 4x3 Keypad, graphical display screen and three LED indicators. The reader has 4 analog inputs, which can be used to monitor door and alarm conditions for transmission to the host computer. Two outputs are also available to control the activation of door locks or other equipment. Single process & network solution Fingerprint enrollment is captured and stored via the AC2000 access control system at the same time as cardholder enrollment. This offers clients a single solution and eradicates the requirement to purchase a separate biometric reader and software application to link to the access control system. Host Communications The S610f has an on-board 10/100 Mbps Ethernet allowing for fast fingerprint enrollment over the TCP/ IP network using RC4 encryption. The S610f communicates directly with the AC2000 host server, removing the need for an intelligent control panel in the system design. Onboard Card Reading Technologies The S610f supports onboard card reading technologies for 125 KHz Proximity and 13.56 MHz Mifare, iClass, DESFire and dual technology (Prox/ Mifare). Other technologies can be externally supported using the two available onboard Wiegand connections.

 Open the catalog to page 1
S610f Fingerprint Reader-2

Off-line Card Validation The card details and biometric templates are initially downloaded to the reader’s memory from the host computer with subsequent changes to card data automatically sent as updates. This ensures that the reader has up-to-date card information when operating in off-line mode. Operating in off-line mode the reader can hold in excess of 123,000 fingerprint templates. Physical Size . . . . . . . . . . . . . . . . . . . . Weight . . . . . . . . . . . . . . . . . . Housing . . . . . . . . . . . . . . . . . Color . . . . . . . . . . . . . . . . . . . Reader Messages Power Voltage...

 Open the catalog to page 2

All CEM Systems catalogs and technical brochures

  1. SALTO SALLIS

    2  Pages

  2. S700s

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.