CUSTOMCONTROLSENSORS
2Pages

Hazardous Areas Adjustable Pressure Switch DESCRIPTION 6900GE*K** - Diaphragm Sensor with Turck® Connector SERIES: 6900GE* 6900GZE* • Turck® electrical connection for easy “plug and play” in Class I, Division 2 applications ADJUSTABLE • Turck® connector provides superior ingress SET POINT RANGE: protection 1 to 3400 PSIG • No electrical junction box required. 0.07 to 234 bar • Highly reliable devices utilizing the 6.89 to 23400 kPa CCS Dual-Snap® Belleville disc spring principle pioneered by CCS’ engineers. • Engineering based on aerospace technology. OPERATING TEMPERATURE: Temperature limits change with O-ring selection. • Rigid, compact and internally adjustable for -40° to 176°F convenient field set point adjustment. -40° to 80°C • Repeatable and stable set points. • Vibration and shock resistant. STANDARD FEATURES: • High cycle life. • CE Mark • High over-pressure capability. • CRN (System and Proof) • Dual Seal: ANSI/ISA-12.27.01 • NACE MR0175 / ISO 15156 • Hermetically sealed electrical assembly for • NEMA: 4, 7, 9,13 / IP66 environmental protection. SHIPPING WEIGHT: APPROXIMATELY 18 OUNCES (510 GRAMS) INSTALLATION DRAWING 1.00 HEX (25,4 mm) ELECTRICAL CONNECTION 7/8-16 UN MALE THREADS 4 OR 6 MALE PINS U.L. / cUL Hermetically Sealed Electrical Assembly 316 SST Electrical Assembly DESIGN PRINCIPLES 6900GZEK**-7066 FLUSH MOUNT CONFIGURATION SHOWN BELOW (-7074 FLUSH MOUNT HASTELLOY) UL & cUL CERTIFIED PRODUCT ADJUSTMENT WHEEL (2) MOUNTING HOLES .210 (5,3 mm) DIAMETER 1.125 (28,6 mm) 1.25 HEX (31,8 mm) DIAPHRAGM IS FLUSH WITH THIS SURFACE *See Installation & Maintenance Instructions 10-1228 FIELD SETTING: Loosen access cover. Adjust adjustment screw using screwdriver slot as illustrated, then attach to a variable pressure source with a suitable gage, and check that the circuit continuity operates at the pressures desired. Clockwise to increase settings. Counterclockwise to decrease setting. NOTE: DO NOT USE ELECTRICAL HEX FOR TORQUING.

O PERATING AND ORDERING DATA Hazardous Areas Adjustable Pressure Switch 6900GE*K** - Diaphragm Sensor with Turck® Connector 1. Specify the series based on your required set point, range, dead band, system pressure and proof pressure. 2. Add desired options model code letter (*). 4. Add the applicable standard suffix number. (Ex: 6900GCEK4D12-7044) PRESSURE CONVERSION 1 BAR = 14.5 PSI 1 kPa = 0.145 PSI OPTIONS MODEL CODES (*) A: Viton® O-Ring (STD on GZE models) C: + Suffix for Different Welded Capsule Materials F: Ethylene Propylene O-Ring OPTIONAL STANDARD MODIFIED SUFFIXES 7008: Gold...