AVIATION CHOKS

Product catalog summary

Product Overview: The document provides details about aviation chocks manufactured by José R. Anton. These chocks are made from EPDM, known for its resistance to harsh weather conditions, and have a hardness of 65 Sh. The chocks are available in different sizes and colors, with three main models currently offered.

Model Specifications:

Mod K: This model features a thicker wall, making it the heaviest at approximately 7.5 kilos per piece. Its dimensions are 180 x 160 x 300 mm, with customizable length.
Mod H: Similar to Mod K but lighter due to a thinner wall, weighing approximately 5.5 kilos per piece. It shares the same dimensions as Mod K, with customizable length.
Mod P: The smallest model, weighing approximately 2.5 kilos per piece, with dimensions of 110 x 110 x 300 mm and customizable length.

Catalog excerpts

José R. Anton Telf. 629 93 1628 E-mail: [email protected] AVIATION CHOKS Manufactured in EPDM which makes them very resistant to inclement wea 65 Sh hardness We can manufacture different sizes and in different colors Currently we have 3 models Mod k It has a thicker wall and therefore is the heaviest (weight approx. 7.5 kilos / piece). Measurements 180 x 160 x 300 mm (we can make the length as you want) Mod H It is the same mod but somewhat lighter because its wall is less thick (weight approx 5.5 kilos/piece) Stockings 180 x 160 x 300mm (we can make the length as you want) Mod P This model is the smallest of the ones we manufacture (weight approx 2.5 kilos/piece) Measures 110 x 110 x 300 mm (we can make the length as you want)

Open the catalog to page 1

All Cauchos Anton catalogs and technical brochures

Fiche technique
1 Page