1. Catalogs
  2. CAES
  3. Frequency Converters
video corpo

Frequency Converters

Frequency Converters

Frequency Converters

Product catalog summary
Overview
This document describes a 3U Converter Wideband Microwave Transceiver designed for electronic warfare, ELINT, and electronic support/surveillance/attack. It operates within a frequency range of 0.5 – 18 GHz and is a SOSA-aligned, conduction-cooled VPX RF Payload Card. The transceiver provides coherent up and down conversion channels with an internal synthesizer in a single, 3U slice.
Key Features
  • Frequency Range: 0.5 – 18 GHz
  • Instantaneous Bandwidth: 2 GHz
  • Tuning Speed: < 350 ns
  • Channel Configurations: Two channels (1 Rx/1Tx, 2 Rx, or 2 Tx)
  • SOSA Alignment: Built-in LO Generation with phase lock to external reference
Adaptability
  • Final IF can be centered from 2.5 to 4.5 GHz with IBW ranging from hundreds of MHz up to 2 GHz.
  • External LO input and output for driving multiple units with one synthesizer.
  • Operates with a reference frequency from 10 to 250 MHz.
Reconfigurability
  • Available configurations include 1 Up-converter/1 Down-converter, 2 Up-converters, and 2 Down-converters, with or without an internal synthesizer.
Optimization
  • Digitally controllable attenuators for enhanced noise performance or output power and linearity.
  • Output blanking capability.
Built-in Testing
  • Output power sensors for both down and up conversion channels.
  • Temperature monitoring.
Specifications
  • RF Frequency Conversion: 0.5 - 18 GHz
  • Nominal Gain: 25 dB with a tolerance of +/- 0.75 dB
  • Noise Figure: 17 dB for Down-Converter, 19 dB for Up-Converter
  • OP1dB: 20 dBm for Down-Converter, 17 dBm for Up-Converter
  • OIP3: 30 dBm for Down-Converter, 29 dBm for Up-Converter
  • Maximum RF Input Power: 20 dBm
  • IF Frequency: 2.5 to 4.5 GHz
  • Instantaneous IF Bandwidth: 0.5 to 2.0 GHz
  • Gain Flatness in IBW: +/- 2.25 dB
  • Center Frequency Tuning Step Size: 1 MHz
  • Group Delay Flatness: < 5 ns
  • Tuning Speed: 350 ns
  • Number of Tune States: 32
  • Single Signal Spurious: -60 dBc at Pin < -15 dBm for Down-Converter, -45 dBc at Pin < -10 dBm for Up-Converter
  • Harmonics: -60 dBc at Pin < -15 dBm for Down-Converter, -55 dBc at Pin < -10 dBm for Up-Converter
  • Internally Generated Spurious: -70 dBm for Down-Converter, -60 dBm for Up-Converter
  • Integrated Phase Noise: 1.0 o RMS (100 Hz to 40 MHz with 100 MHz ref.)
  • Customer Attenuation: RF and IF: 15 dB, 0.5 dB steps
  • Power: Voltage supplies: VS1 = 12 V; V_AUX = 3.3V, < 75W
  • Operating Temperature Range: -40 oC to +75 oC, Conduction Cooled
  • Size: 3U, 1.0" - Single Slot
  • Weight: 2.4 lbs.
  • Frequency Reference: 10 to 250 MHz
Interface and Control
The SOSA Aligned Interface utilizes a 10 GbE control interface. LVDS Expansion plane lines on P1 enable switching between 32 user predefined tune states. User-defined tune states are configurable over the 10GbE interface. Tuning via the 10GbE interface is allowed but not guaranteed to meet < 350 ns switching time. The unit can be configured for independently tuned channels with a modest level of design effort.
See more

Catalog excerpts

Frequency Converters-1

Wideband Microwave Transceiver Designed for electronic warfare, ELINT and electronic support/surveillance/attack, this 0.5 – 18 GHz wideband converter is a SOSA-aligned, conduction cooled, VPX RF Payload Card which provides coherent up and down conversion channels with an internal synthesizer in a single, 3U slice. With its modular construction it can be configured to accommodate the following coherent channel configurations: two up or two down conversion channels. • 0.5 – 18 GHz 3U VPX Tuner • 2 GHz Instantaneous Bandwidth • < 350 ns Tuning Speed • Two Channels o 1 Rx/1Tx, 2 Rx, or 2 Tx • SOSA Aligned • Built-in LO Generation o Phase Lock to External Reference Flexible IBW Down Converter Internal Synthesizer Features Adaptable • Final IF can be centered from 2.5 to 4.5 GHz with instantaneous bandwidths (IBW) ranging from hundreds of MHz up to 2 GHz based on final IF External LO input and output for driving multiple units with one synthesizer Can operate with a reference frequency from 10 to 250 MHz Available in several configurations 1. 1 Up-converter / 1 Down-converter, common synthesizer 2. 2 Up-converters, common synthesizer 3. 2 Down-converters, common synthesizer 4. Configurations 1 through 3 without internal synthesizer Optimizable • Front-end and back-end digitally controllable attenuators for enhanced noise performance or output power and linearity • Output Blanking Built-in Testing • Output power sensors for both the down and up conversion

 Open the catalog to page 1
Frequency Converters-2

SOSA Aligned Interface utilizes a 10 GbE control interface. LVDS Expansion plane lines on P1 are utilized to enable switching between 32 user predefined tune states. User defined tune states are configurable over the 10GbE interface. Tuning via the 10GbE interface is allowed as well but not guaranteed to meet < 350 ns switching time. With a modest level of design effort, the unit can be configured for independently tuned channels.

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.