3401-001 D*M Standard Density
28Pages

Features/Benefits • D*Sub Connector Type • Contacts installed in factory • Multiple contacts configuration: Solder Cup, 90° bent, Straight PC, Wire-wrap • From 9 to 50 ways Typical Applications • Payloads PCB • Launchers • PCB Test Connectors with solder type or wire-wrap type termination contacts size 20 inserted into one-piece insulators. Termination types available: - Solder Bucket terminations - Straight PCB solder terminations - 90° bent PCB solder terminations - Wire-wrap terminations Combination arrangements available for size 8 snap-in coaxial, power, or high voltage contacts Connectors supplied without coaxial power or high voltage contacts. Power and coaxial contacts have to be ordered separately but signal contacts are installed in factory. Signal contact are solder bucket type. Other type could be asked under request. Packaging unit: 1 piece (plastic bag) Dust cap supplied with each connector, only for quality level ESA/ESCC How to order - ESA/ESCC Quality Level 3401001 Detail specification number Variant- 01: Standard density Testing level- Series ■ Shell size . E A B C D Insert type: M for one-piece insert Fixing option: Nothing: Standard through hole E: Captive nut Y: Dual float mount Fixing option E or Y not compatible with connectors equipped with bracket. Termination modifier Solder buckets: Nothing Straight PCB: OL3, Z 90° bent PCB without brackets 1A0N, 1B0N, 2A0N, 2B0N, P 90° bent PCB with brackets 1A7N, 1B7N, 1A9N, 1B9N, 2A7N, 2A9N, 2B7N, 2B9N, L7, L9 Wire-wrap: F179A Magnetism level NMB: 200 Gamma NMC: 20 Gamma (on special request) Type of contact P: Pin (Male) S: Socket (Female) Contact arrangement (number of contacts) Number of contacts for variant 01: E: 9 A: 15 B: 25 C: 37 D: 50 Number of contacts for combination arrangements: E: 5W1 Dimensions are shown in mm (inch) Dimensions subject to change

Series ■ Shell size -E A B C D Insert type: M for one-piece insert According to MIL-DTL-24308 Specification- Fixing option: - Nothing: Standard through hole E: Captive nut Y: Dual float mount Fixing option E or Y not compatible with connectors equipped with bracket. Suffix for MIL Class M Quality Level (Connector Specification FR023) Termination modifier Solder buckets: Nothing Straight PCB: OL3, M, Z 90° bent PCB without brackets 1A0N, 1B0N, 2A0N, 2B0N, P 90° bent PCB with brackets 1A7N, 1B7N, 1A9N, 1B9N, 2A7N, 2A9N, 2B7N, 2B9N, D, L, L7, L9 Wire-wrap: F179A Magnetism level NMB: 200...

Series Shell size E A B C D Insert type: M for one-piece insert Fixing option:- Nothing: Standard through hole E: Captive nut Y: Dual float mount Fixing option E or Y not compatible with connectors equipped with bracket Suffix for MIL Class M Quality Level (Connector Specification FR022) — Termination modifier Solder buckets: Nothing Straight PCB: OL3, M, Z 90° bent PCB without brackets 1A0N, 1B0N, 2A0N, 2B0N, P 90° bent PCB with brackets 1A7N, 1B7N, 1A9N, 1B9N, 2A7N, 2A9N, 2B7N, 2B9N, D, L, L7, L9 — Wire-wrap: F179A Magnetism level NMB: 200 Gamma NMC: 20 Gamma (on special request) — Type...

Termination Types Terminations Male Connector Solder Bucket Straight PCB Solder 90° Bent PCB Solder / Without Bracket / European Footprint 90° Bent PCB Solder / With Brackets / European Footprint 90° Bent PCB Solder / Without Brackets / U.S. Footprint 90° Bent PCB Solder / With Brackets / U.S. Footprint Wire-Wrap Female Connector (Full pin diameter)_(Full pin length) WeightsMax Weight (grams) without contacts or accessories Shell Size Weight (Grams) Male Female For the total connector weight, add the weight _A of the contacts and of the eventual accessories.* B For the weight of...

Sizes E, A, B, C Size D Termination Contacts Shell Size D ± 0,60 (.024) E Typical 0F + 0,05 (.002) / 0 G ± 0,55 (.022) H min Pitch between contacts Max Weight (grams) per contact 0,19 0,22 Max Weight (grams) of all contacts per size E 1,71 1,98 Recommended wire trim length _D_ 9,50 11,00 Recommended instruction for wire stripping: Cut wires to length and strip insulation per illustration. Check for broken or frayed wires. Accepted wire sizes: insulated AWG20, AWG22, AWG24 Dimensions are shown in mm (inch) Dimensions subject to change

Solder bucket *FR023 under request only Dimensions are shown in mm (inch) Dimensions subject to change

Contacts Shell Size D min D max E Typical Pitch between contacts Termination Modifier: OL3, M, Z For other termination modifier, consult factory Weights Shell Size Male Contact Female Contact Max Weight (grams) per contact Max Weight (grams) of all contacts per size E A B C D Dimensions are shown in mm (inch) Dimensions subject to change

Solder bucket *FR023 under request only Dimensions are shown in mm (inch) Dimensions subject to change

*FR023 under request only Dimensions are shown in mm (inch) Dimensions subject to change

Sizes E, A, B, C Termination 0F EModifier ± 0,05 (.002) Typical P_0,76 (.030) 2,84 (.112) Contacts Shell Size D min D max G ± 0.37 (.015) Pitch between contacts Termination Modifier: P For other termination modifier, consult factoryWeightsShell Size Male Contact Female Contact Max Weight (grams) per contact_ Max Weight (grams) of all contacts per size E A B C D Dimensions are shown in mm (inch) Dimensions subject to change

90° bent PCB (without brackets) *FR023 under request only Dimensions are shown in mm (inch) Dimensions subject to change

Contacts Shell Size D min D max G ± 0.30 (.012) Pitch between contacts Termination Modifier: 1A0N, 1B0N, 2A0N, 2B0N For other termination modifier, consult factoryWeightsShell Size Male Contact Female Contact Max Weight (grams) per contact_ Max Weight (grams) of all contacts per size E A B C D Dimensions are shown in mm (inch) Dimensions subject to change

90° bent PCB (without brackets) *FR023 under request only Dimensions are shown in mm (inch) Dimensions subject to change