SAD101-SB18
1Pages

e-GPU GREEN POWER UNIT The pictures are not contractual MEGABOOST AVIATION SAD101-SB Combination Unit is a state-of-the-art design model that supplies true 28.5VDC output, with no input mains applied. This is the true GREEN GPU. The unit has a dual purpose: it provides 28.5VDC continuous power for avionics work and is used to start the aircraft or APU. The unit can operate in either AC Mode (power supply modules get power from the single-phase input mains applied) or DC Mode (power supply modules get power from the internal batteries). This unit is very quiet and simple to operate. Supplied with: 25m input cable fitted with connectors The SAD101-SB is suitable for continuous and starting power for the medium size range of 28V aircraft. Use 100A for 1 hour in DC Mode and then start the engine with 1000A in 5 s 3m output cable fitted with the aircraft plug SPECIFICATION Input Voltage (AC Mode) Input Current Output Voltage Output Ripple Continuous Current 230VAC +/- 10%, Single Phase 16A @ 230VAC 28.5VDC Continuous <150mV 100A (Continuous in AC Mode) 100A for 1 hours (DC Mode) Starting Current 1000A Starter Battery Capacity 25.8V - 45A/Hr Internal Battery Capacity 360V - 18A/Hr Operating Temperature -20°C to +50°C Enclosure (rain protection) IP55 Protection Over/Under Voltage, Over Current, Over Temperature and Short Circuit Dimensions (Unit only) L = 600mm, W = 500mm, H = 600mm Weight (Unit only) 140Kg BV CORPORATION 3, rue du Vieux Moulin 74960 Meythet (Annecy) France 3M (95mm) Output cable fitted with rubber aircraft plug Internal batteries that automatically charge when connected to the input mains Very quiet and simple to operate Fitted on towable trolley for mobility CE Mark Certified (EN61000-6-4 Electromagnetic compatibility - Generic emission standard; EN61000-6-2 Electromagnetic compatibility – Generic immunity standard; Low Voltage Directive (LVD) 2006/95/EC) Ripple and Noise < 150mv Load Regulation +/-0.5% MEGABOOST trademark is registered by BV Corporation - Partial or total reproduction forbidden without agreement. Specifications can be changed without any notice