Configuration examples Different scraping edge for different snow type: SCRAPING EDGE MATERIAL - Bi-shore neoprene scraping edge for soft or wet snow Neoprene Rubber - Steel scraping edge for hard packed or iced snow “LC” with single neoprene scraping edge In “Neoprene” special realisation with bi-shore structure; His profile asphalt or also stone block pavement, respecting the existing norm. Gmeiner GmbH Wernberg-Köblitz It doesn’t generate vibration to the equipment and to the truck. Lifecycle of this special neoprene scraping edge higher than steel one. Bucher Municipal Niederweningen Lower maintenance cost due to the easy structure without spring Arvel Industries Sarl security. Conform to the EN13021 norm, safety equipment for winter maintenance. Maquiasfalt S.L. Madrid “LN” with neoprene scraping edge and a second steel scraping edge with hydraulic actuation from cab Related to the snow type, possibility to set from the cab the steel or neoprene scraping edge. The steel scraping edge overpass the obstacle thanks to a Nitrogen accumulator in Hardox 400. BMU_L_EN_rev04 – 07/2020 - The technical data and pictures are indicative and not binding. copy perfectly the road surface shape. It doesn’t generate noise, with Snow Ploughs Giletta SpA Via A. De Gasperi, 1 I-12036 Revello (CN) tel. +39 0175 258 800 fax. +39 0175 258 825 [email protected] Electro-hydraulic control unit (optional) Installed on the plough mounting plate when vehicle is not provided with own hydraulic system. Lateral shield protection low speed (option) Realized in steel, they are ideal for clearing with contact near iced snow in mountain Lateral shield protection high speed (optional) Realized in moulded polyurethane, they are ideal for clearing with contact near new-jersey barriers Carriages with pivoting wheels (optional) Used to easily move the equipment when stored. A wheel per carriage is equipped with a parking brake.

Nitrogen accumulator With steel scraping edge, a nitrogen accumulator allows the shock absorption. Monolithic medium-heavy plough L type, with HD polyethylene shield and a structure realized with high Rotation Rotation angle from -32° to + 32° resistance steel. The Polyethylene is fixed to the structure with a system allowing the changing due to the temperature. The polyethylene material for shield warranty a long lifecycle against corrosion avoiding the Steel structure Realised in high resistance steel. friction of the snow , demanding less power with a better snow evacuation vs a classic steel...