2923-28W, 2923-2874, 2923-28BHigh Speed Surface-Mounted ADA Compliant Hand Dryer US LISTED a Recommended for very high traffic areas. □ Standard Model 2923-28W000 (aluminum-white epoxy) BradEX® □ Standard Model 2923-287400 (stainless steel-satin finish) BradEX® □ Standard Model 2923-28B000 (aluminum-black epoxy) BradEX® Product Materials 2923-28W COVER: 1/8" (3 mm) thick one-piece aluminum; white epoxy finish. 2923-2874 COVER: 1/16" (2 mm) thick one-piece stainless steel; satin finish. 2923-28B COVER: 1/8" (3 mm) thick one-piece aluminum; black epoxy finish. Cover fixed to the base plate with vandal-proof lock screws and lock with special key wrench. MOTOR: High pressure universal brush (31,000 RPM). Motor shall have replaceable brushes for extending service life. FILTER: HEPA filter reduces contaminates in the air when hand drying. HEATING ELEMENT: Dryer will incorporate a nichrome wire heating element protected by an automatic resetting thermal cutoff. ADJUSTABLE SENSOR OPERATION: Dryer shall be activated by an automatic infrared sensor with a 30 second vandal shut-off. Control board shall contain a HI/LOW speed control switch. Dryer shall provide an exit air temperature of 130°F at an ambient temperature of 70°F. BASE PLATE: The Wall Mounting plate shall be constructed of die-cast aluminum finished with chrome plating. Installation Verify all rough-in dimensions prior to installation. Hand dryers require a dedicated circuit with a minimum of 15 amps and must be properly grounded. GFI Circuit protection is recommended. One side of dryer should be mounted to a stud. Surface-mounted hand dryer shall have an aluminum cover with a white epoxy finish (2923-28W), stainless steel cover with satin finish (2829-2874) or an aluminum cover with black epoxy finish (2923-28B). Hand dryer shall include a cast aluminum base and universal brush type motor (31,000 RPM). Dryer shall operate at 65 - 87 dB while delivering 64 CFM air flow velocity at 225 MPH (19,800 LFM). Dryer shall provide an exit ambient air temperature of 130°F at an ambient air temperature of 70°F. Dryer shall have global universal voltage, accepting 110-120/208/220-240 VAC input. Dryer shall have a total power of 950 watts with a consumption of 8.3 amps (120 V) and 2.0 to 5.6 amps (220 V). Overall dimensions: 13-5/16"H x 11-5/8"W x 3-7/8"D (338mm x 295mm x 99mm). Weight: White & Black = 11.9 lb (5.4 kg), Stainless = 13.4 lb (6.08 kg) Product Specifications Operation Place hands 3"-6" below nozzle to activate air flow. Dryer will stop two seconds after hands are removed from air flow. Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley. Page 1 of 2 7/2/2019 This information is subject to change without notice. Bradley_HandDryer_2923-28W_2874_28B

2923-28W, 2923-2874, 2923-28B High Speed Surface-Mounted ADA Compliant Hand Dryer WALL ENTRY Orders composed of products indicated as BradeX® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley. Page 2 of 2 7/2/2019 This information is subject to change without notice. Bradley_HandDryer_2923-28W_2874_28B