2EL-TARMAC
5Pages

Elevated LED Floodlight for Heliports, Winching Areas and Building Structures The 2EL-TARMAC-EL LED-Floodlight is dedicated to illuminate the surface of the takeoff and landing zone of heliports, helidecks as well as Public Interest Sites. Further the 2EL-TARMAC-EL suits for the illumination of winching areas and for highlighting elevated structures effecting the operations on a heliport. It complies fully with the requirements of ICAO Annex 14. Vol. 2, BMVI AVV I36/06 and FOCA Guideline AD I-012D FEATURES ■ High efficiency due to a dedicated optics concept for the use on heliports ■ Easy to adjust in height, elevation and azimuth + adjustable shutter against glare ■ Including 60mm pedestal with frangible coupling and 2” 11.5 NPS male threat ■ Increased service life time due to advanced thermal design ■ Optimized sealing concept against the intrusion of liquids and dust (IP 67) ■ Enhanced protection against corrosion due to anodization and powder coating ■ Safety Extra Low Voltage compliant (24V Version) ■ Enhanced surge current protection (24V Version) ■ Compliant to ICAO, EASA, German and Swiss standards ■ CE Certified REFERRED STANDARDS ■ ICAO Annex 14 Vol 2. Heliports, 4. Edition ■ BMVI AVV I36/06 ■ FOCA AD I-012D ■ ICAO Annex 14 Vol 1. Aerodrome Design and Operation ■ ICAO DOC 9261 Heliport Manual ■ ICAO DOC 9157 Aerodrome Design Manual Part 6 (Frangibility) ■ FAA AC 150/5390-2C Heliport Design ■ FAA Engineering Brief 67D Light Sources others than Incandescent and Xenon ■ CAA CAP 437 Standards for Offshore Helicopter Landing Areas ■ IEC TS 61827 Electrical Installations for Lighting and Beaconing of Aerodrome

Material Surface Color (Housing) Operating temp. Solar radiation Storage temp. Protection class Height Adaptor Break Momentum Useful Lifetime Weight Package (2 Units) Dimensions Terminal Ferrules Electrical Data Voltage Range 20V - 28VDC Current 1.7A @ 24VDC Surge Protection 8/20ps 5kA 10 times

DATASHEET 2EL-TARMAC Cable Length 40 cm Terminal Ferrules

Auxiliaries • 5" to 2" 11.5 NPS thread adaptor for installation on 2IL5 Shallow Base • 2EL8-BP 8" Base Plate with 2" 11.5 NPS female threat Rev 3.0 March 2019

BATT GmbH Wilhelm-Bertelsmann-Str. 8 33602 Bielefeld Germany Tel: +49 521 96797 49 http://www.batt-gmbh.com info@batt-gmbh.com BATT GmbH reserves the right to change technical data and details at any point in time. Errors may occur. All rights reserved. Publication, copying, distribution, exhibition, representation and/or reproduction in any form or utilization are explicitly prohibited without prior approval by BATT GmbH