2020 FAA L-810
2Pages

FAA L-810 Low Intensity Obstruction Light Optional AV-OL Series Universal AC or Universal DC Single Light Fixture GSM RS422/485 Port LED Optic Low power consumption Combined visual & infrared visibility for pilots using night vision (optional) Small form factor, minimal wind loading Tough UV-stabilized LEXAN® polycarbonate lens & light base Easily installs to ¾ inch pipe thread Monitoring options available Standard Model Model shown with optional 1 inch pipe thread adaptor Features Cost effective, energy efficient obstruction lighting solution Available in universal DC: will accept between 12–48VDC This Avlite light fixture is a steady burning, low intensity LED obstruction light designed to comply with FAA L-810 requirements. The model can be used for marking obstacles which pose a threat to aircraft, such as telecommunication towers, wind turbines, buildings and other tall structures. Available in universal AC: will accept between 110–240VAC Avlite’s LED obstruction lights offer an ultra bright, energy efficient and cost effective lighting solution. The light fixture is available in two configurations, universal DC (12–48VDC) or universal AC (110–240VAC). User-adjustable operation mode to toggle between dusk-till-dawn & 24hr operation The advanced light optic uses a single LED for minimal power consumption. The corrosion resistant, polycarbonate lens is specifically designed for use with LEDs to maximize light intensity and uniformity. Alarm contact for remote monitoring Light sensor for day/night operation LED technology reduces maintenance time & costs Easily retrofits with existing installations The light fixture incorporates internal diagnostic checking and an alarm contact for remote monitoring. The alarm relay is energized in normal operation and is released if there is an LED or power fault. The unit is available with either a ¾ or 1 inch thread type - making it simple to retrofit with existing installations. Optional solar powered configurations available The obstruction light also has an adjustable operation mode setting to allow the user to easily toggle between dusk-till-dawn and 24 hour operation modes. Optional combined visual/IR for pilots using NVG The obstruction light is also available with combined visual and infrared (IR) visibility for pilots using night vision. Available with optional GSM monitoring Available with optional RS422/485 communications port for monitoring & synchronization for VDC model The Avlite single obstruction light is available with GSM Cell-Phone Monitoring, enabling operators to remotely monitor the status of their installation. The system can also be configured to send out SMS text messages or e-mail alerts to designated operators should alarm conditions be triggered, such as low voltage or light failure. Low Intensity Obstruction Light for marking top of obstacles that do not exceed 150 feet (45 metres) in height Certifications Certified to FAA AC150/5345-43G for L-810 Steady-burning Red Obstruction Light Compliance FAA Engineering Brief No. 67D

FAA L-810 LIOL Single Fixture 12–48 VDC Light Characteristics As tested; FAA: AV-OL-FL810-12-R LED Available colors Red as standard. Other colors available on request, including IR Red as standard. Other colors available on request, including IR Complies with FAA L-810 obstruction lights Complies with FAA L-810 obstruction lights Horizontal Output (degrees) Vertical Divergence (degrees) As per FAA L-810 obstruction light specification As per FAA L-810 obstruction light specification Reflector Type Intensity Adjustments Operation Mode Adjustment User-adjustable between dusk-till-dawn & 24...