IN-RT
IN-RT
- The LED Inset Runway Threshold Light complies with various international standards including ICAO, EASA, FAA, IEC, NATO, CAA, and IAAE.
- Specific standards include Annex 14 - Volume I, CS-ADR-DSN, AC150/5345-46 & EB No.67D, TS 61827, STANAG 3316, CAP 168, and TP312.
- Designed for use at runway thresholds.
- Can be installed in 12-inch shallow or deep bases.
- Refer to user manual DC-MN-IN-12 for detailed installation instructions.
- Operates in temperatures ranging from -45 °C to +55 °C (-49 °F to +131 °F).
- Can withstand up to 100% humidity.
- Diameter: 304 mm, Depth: 106 mm, Weight: 8.3 kg.
- LED unidirectional light with an average life of 60,000 hours at full intensity, extending to over 100,000 hours under typical conditions.
- Low energy consumption compared to halogen lights, reducing the range of CCRs and transformers needed.
- Compatible with existing airfield lighting infrastructure, allowing for straightforward replacement.
- IP68 rated for dust-tight and water submersion protection.
- Fully dimmable with variable light output similar to traditional halogen lights.
- Built-in voltage surge and lightning protection.
- Provides consistent light output with no visual flickers.
- Consumption at 6.6A: 36 VA without heater, 76 VA with heater.
- Power factor of 0.98 without heater and 0.96 with heater.
- Includes dome, prism, LED PCB, heatsink, and other essential components for optimal performance.
Catalog excerpts
LED Inset Runway Threshold Light Aviasafe GmbH Headoffice DE 98597 Fambach Neue Wiese 2 • IP68: Dust-tight and protected against DE 60478 Frankfurt am Main/ Germany submersion in water. • Designed with few mechanical parts, resulting in a more affordable price and allowing for longer maintenance intervals. • Fully dimmable lights. The light output is variable, similar to a traditional halogen light, operating within the 2.8 A to 6.6 A range. • Low protrusion, Style 3 inset light fixtures. • The electronics are fully encapsulated. • Optimized LED performance ensures there are no visual flickers. • The Dome is designed with no negative slope in front of the prism. • Built-in voltage surge and lightning protection. INSTALLATION Light fixture can be installed in 12-inch Shallow Base & Deep Base. Refer to the user manual DC-MN-IN-12 FEATURES & BENEFITS • LED Unidirectional 12” • Average LED life of 60,000 hours at full intensity but over 100,000 hours in typical operating conditions. to halogen lights, resulting in a lower range of CCRs and transformers. • Very low energy consumption compared • Low life cycle costs due to the long LED APPLICATIONS • Runway Threshold ENVIRONMENTAL CONDITIONS Temperature: -45 °C to +55 °C DIMENSIONS & WEIGHT Diameter: 304 mm Depth: 106 mm Weight: 8.3 kg ferroresonant or thyristor CCRs. • In compliance with FAA & EASA standards. • Fully compatible with existing Airfield Lighting infrastructure. Installation on the same mounting device as most conventional light
Open the catalog to page 1
IN-RTLED Inset Runway Threshold Light www.aviasafe.de MAIN COMPONENTS OF THE LIGHT UNIT 01. Dome (Upper Cover) 02. Prism Gasket 03. Prism 04. Prism holder gasket 05. Prism holder 06. TIR 07. LED PCB 08. Heatsink 09. O-Ring for dome (internal) 10. O-Ring for lower cover 11. Lower cover with electronics 12. Gland with accessories 13. Valve for watertightness test 14. Plug(lead wire) PHOTOMETRIC PERFORMANCE ELECTRICAL TABLE Threshold With Heater 76 VA 0.96 0.98 INSTALLATION SECTION IN-RT - S - M - H 12" Inset Light Type for Runway Threshold Heater • H : With Heater • C : Without Heater
Open the catalog to page 2All Aviasafe GmbH catalogs and technical brochures
- Color light
- Airport lighting system
- Runway beacon
- Aircraft lighting system
- Approach beacon
- Helideck lighting system
- Power supply
- Position beacon
- Taxiway light
- AC/DC power supply
- Airport sign
- Runway sign
- PAPI light
- Passenger boarding bridge
- Boarding bridge
- Runway end identification beacon
- Heliport use light
- Boarding bridge with window walls
- Constant current power supply