IN-RL
2Pages

IN-RL LED Inset Runway Centerline & Rapid Exit Taxiway Indicator Light Aviasafe GmbH Headoffice DE 60478 Frankfurt am Main/ Germany Tel +49 69 970 863 97 info@aviasafe.de www.aviasafe.de COMPLIANCE ICAO Annex 14 - Volume I EASA CS-ADR-DSN FAA AC150/5345-46 & EB No.67D IEC TS 61827 NATO STANAG 3316 CAA CAP 168 IAAE TP312 APPLICATIONS • Runway Centerline • Rapid Exit Taxiway Indicator Light (RETIL) FEATURES & BENEFITS • LED Bidirectional 12" • Average LED life of 60,000 hours at full intensity but over 100,000 hours in typical operating conditions. • Very low energy consumption compared to halogen lights, resulting in a lower range of CCRs and transformers. • Low life cycle costs due to the long LED lifespan. • Operates on 3-step or 5-step ferroresonant or thyristor CCRs. • In compliance with FAA & EASA standards. • Fully compatible with existing Airfield Lighting infrastructure. Installation on the same mounting device as most conventional lights for a straightforward replacement. • IP68: Dust-tight and protected against submersion in water. • Designed with few mechanical parts, resulting in a more affordable price and allowing for longer maintenance intervals. • Fully dimmable lights. The light output is variable, similar to a traditional halogen light, operating within the 2.8 A to 6.6 A range. • Low protrusion, Style 3 inset light fixtures. • The electronics are fully encapsulated. • Optimized LED performance ensures there are no visual flickers. • The Dome is designed with no negative slope in front of the prism. • Built-in voltage surge and lightning protection. INSTALLATION Light fixture can be installed in 12-inch Shallow Base & Deep Base. Refer to the user manual DC-MN-IN-12 ENVIRONMENTAL CONDITIONS Temperature: -45 °C to +55 °C -49 °F to +131 °F Humidity: Up to 100% DIMENSIONS & WEIGHT Diameter: 304 mm Depth: 106 mm Weight: 8.3 kg

IN-RL LED Inset Runway Centerline & Rapid Exit Taxiway Indicator Light MAIN COMPONENTS OF THE LIGHT UNIT 01. Dome (Upper Cover) 02. Prism Gasket 03. Prism 04. Prism holder gasket 05. Prism holder 06. TIR 07. LED PCB 08. Heatsink 09. O-Ring for dome (internal) 10. O-Ring for lower cover 11. Lower cover with electronics 12. Gland with accessories 13. Valve for watertightness test 14. Plug(lead wire) PHOTOMETRIC PERFORMANCE ELECTRICAL TABLE INSTALLATION SECTION IN-RL - RC - WW - 1P - M - H 12" Inset Light Type For Runway Centerline Application • RC : Runway Centerline • ET : Rapid Exit Taxiway...