IN-RE
2Pages

AviaSafe IN-RE LED Inset Runway Edge Light Aviasafe GmbH Headoffice DE 60478 Frankfurt am Main/ Germany Tel +49 69 970 863 97 info@aviasafe.de www.aviasafe.de • IP68: Dust-tight and protected against submersion in water. • Designed with few mechanical parts, resulting in a more affordable price and allowing for longer maintenance intervals. • Fully dimmable lights. The light output is variable, similar to a traditional halogen light, operating within the 2.8 A to 6.6 A range. • Low protrusion, Style 3 inset light fixtures. • The electronics are fully encapsulated. • Optimized LED performance ensures there are no visual flickers. • The Dome is designed with no negative slope in front of the prism. • Built-in voltage surge and lightning protection. COMPLIANCE ICAO Annex 14 - Volume I FAA AC150/5345-46 & EB No.67D EASA CS-ADR-DSN IEC TS 61827 NATO STANAG 3316 CAA CAP 168 IAAE TP312 APPLICATIONS • Runway Edge FEATURES & BENEFITS • LED Bidirectional 12" • Average LED life of 60,000 hours at full intensity but over 100,000 hours in typical operating conditions. • Very low energy consumption compared to halogen lights, resulting in a lower range of CCRs and transformers. • Low life cycle costs due to the long LED lifespan. • Operates on 3-step or 5-step ferroresonant or thyristor CCRs. • In compliance with FAA & EASA standards. • Fully compatible with existing Airfield Lighting infrastructure. Installation on the same mounting device as most conventional lights for a straightforward replacement. ENVIRONMENTAL CONDITIONS Temperature: -45 °C to +55 °C -49 °F to +131 °F Humidity: Up to 100% DIMENSIONS & WEIGHT Diameter: 304 mm Depth: 106 mm Weight: 8.3 kg

LED Inset Runway Edge Light MAIN COMPONENTS OF THE LIGHT UNIT INSTALLATION SECTION 01. Dome (Upper Cover) 12" Inset Light Type for Runway Edge 02. Prism Gasket 03. Prism 04. Prism holder gasket 10. O-Ring for lower cover 11. Lower cover with electronics Cable and connectors 1P : One Plug 2P : Two Plugs 09. O-Ring for dome (internal) Monitoring Q : Without Monitoring M : With Monitoring 12. Gland with accessories 13. Valve for watertightness test Heater C : Without Heater H : With heater * The beam aiming is not field adjustable PHOTOMETRIC PERFORMANCE POWER CONSUMPTION Electrical System...