Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. Aviasafe GmbH
  3. IN-AP

IN-AP

IN-AP
1 / 2 PagesView full catalog

IN-AP

Product catalog summary
Compliance and Applications
The document outlines compliance with several international standards including ICAO, EASA, FAA, IEC, NATO, CAA, and IAAE. The applications for the LED lighting system include Approach Centerline and Crossbars, Approach Side Row Barrettes, and Threshold Wing Bar, adhering to Annex 14 - Volume I, CS-ADR-DSN, AC150/5345-46 & EB No.67D, TS 61827, STANAG 3316, CAP 168, and TP312.
Features and Benefits
The LED Unidirectional 12” lights have an average lifespan of 60,000 hours at full intensity, extending to over 100,000 hours under typical conditions. They consume less energy compared to halogen lights, reducing the range of CCRs and transformers needed. The lights are fully dimmable, compatible with existing airfield lighting infrastructure, and designed for easy installation. They are IP68 rated, ensuring dust-tightness and protection against water submersion. The design includes built-in voltage surge and lightning protection, with optimized LED performance to prevent visual flickers.
Installation and Environmental Conditions
The light fixtures can be installed in 12-inch Shallow Base & Deep Base. They operate in temperatures ranging from -45 °C to +55 °C and can withstand up to 100% humidity. The dimensions are 304 mm in diameter and 106 mm in depth, with a weight of 8.3 kg.
Photometric Performance
The document provides detailed photometric performance data for different colors (White, Red, Green) with specific candela values at various angles, ensuring optimal visibility and performance.
Main Components
The light unit consists of several components including the Dome, Prism, LED PCB, Heatsink, and various gaskets and O-rings, ensuring durability and ease of maintenance.
Electrical Specifications
The electrical table specifies power consumption at 6.6A for different configurations (with and without heater) and maintains a power factor of 0.96 to 0.98.
Customization Options
Options for color (White, Red, Green), toe-in (Straight, Left, Right), monitoring (With or Without), and heater (With or Without) are available to suit different application needs.
See more

Catalog excerpts

IN-AP-1

Aviasafe GmbH Headoffice DE 60478 Frankfurt am Main/ Germany Tel +49 69 970 863 97 [email protected] www.aviasafe.de IN-AP LED Inset Approach & Wing Bar Light • IP68: Dust-tight and protected against submersion in water. • Designed with few mechanical parts, resulting in a more affordable price and allowing for longer maintenance intervals. • Fully dimmable lights. The light output is variable, similar to a traditional halogen light, operating within the 2.8 A to 6.6 A range. • Low protrusion, Style 3 inset light fixtures. • The electronics are fully encapsulated. • Optimized LED performance ensures there are no visual flickers. • The Dome is designed with no negative slope in front of the prism. • Built-in voltage surge and lightning protection. COMPLIANCE With ICAO Annex 14 - Volume I EASA CS-ADR-DSN FAA AC150/5345-46 & EB No.67D IEC TS 61827 NATO STANAG 3316 CAA CAP 168 IAAE TP312 APPLICATIONS • Approach Centerline and Crossbars • Approach Side Row Barrettes • Threshold Wing Bar FEATURES & BENEFITS • LED Unidirectional 12" • Average LED life of 60,000 hours at full intensity but over 100,000 hours in typical operating conditions. • Very low energy consumption compared to halogen lights, resulting in a lower range of CCRs and transformers. • Low life cycle costs due to the long LED lifespan. • Operates on 3-step or 5-step ferroresonant or thyristor CCRs. • In compliance with FAA & EASA standards. • Fully compatible with existing Airfield Lighting infrastructure. Installation on the same mounting device as most conventional lights for a straightforward replacement. ENVIRONMENTAL CONDITIONS • Temperature: -45 °C to +55 °C -49 °F to +131 °F • Humidity: Up to 100% DIMENSIONS & WEIGHT • Diameter: 304 mm • Depth: 106mm • Weight: 8.3 kg

 Open the catalog to page 1
IN-AP-2

IN-APLED Inset Approach & Wing Bar Light www.aviasafe.de MAIN COMPONENTS OF THE LIGHT UNIT 01. Dome (Upper Cover) 02. Prism Gasket 03. Prism 04. Prism holder gasket 05. Prism holder 06. TIR 07. LED PCB 08. Heatsink 09. O-Ring for dome (internal) 10. O-Ring for lower cover 11. Lower cover with electronics 12. Gland with accessories 13. Valve for watertightness test 14. Plug(lead wire) PHOMETRIC PERFORMANCE INSTALLATION SECTION ELECTRICAL TABLE IN-AP - AC - W - S - M - H Heater • H : With Heater • C : Without Heater

 Open the catalog to page 2

All Aviasafe GmbH catalogs and technical brochures

  1. LRGS
    LRGS

    2  Pages

  2. EL-RN
    EL-RN

    2  Pages

  3. EL-RT
    EL-RT

    2  Pages

  4. EL-RE
    EL-RE

    2  Pages

  5. IN-TE
    IN-TE

    2  Pages

  6. IN-RN
    IN-RN

    2  Pages

  7. IN-RT
    IN-RT

    2  Pages

  8. IN-RL
    IN-RL

    2  Pages

  9. IN-RE
    IN-RE

    2  Pages

  10. EL-RS
    EL-RS

    2  Pages

  11. EL-AP
    EL-AP

    2  Pages

  12. CCR
    CCR

    2  Pages

  13. AGS
    AGS

    2  Pages

  14. PAPI
    PAPI

    2  Pages

  15. AviaBridge
    AviaBridge

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.