EL-RS
2Pages

LED Elevated Runway Threshold/End Light Aviasafe GmbH Headoffice • Designed with few mechanical parts, DE 60478 Frankfurt am Main/ Germany resulting in a more affordable price and DE 98597 Fambach Neue Wiese 2 allowing for longer maintenance • Fully dimmable lights. The light output is variable, similar to a traditional halogen light, operating within the 2.8 A to 6.6 A range. • The electronics are fully encapsulated. • Optimized LED performance ensures there are no visual flickers. • Built-in voltage surge and lightning protection. INSTALLATION The fixture can be installed on a baseplate or pipe elbow. Refer to the user manual DC-MN-IN-12 ENVIRONMENTAL CONDITIONS Temperature: -45 °C to +55 °C -49 °F to +131 °F Humidity: Up to 100% FEATURES & BENEFITS • LED Bidirectional Elevated Light. • Average LED life of 60,000 hours at full APPLICATIONS • Runway Threshold/End intensity but over 100,000 hours in Volume & WEIGHT Weight: 2.9 Kg Volume(m³): 0.009 typical operating conditions. • Very low energy consumption compared to halogen lights, resulting in a lower range of CCRs and • transformers. Low life cycle costs due to the long LED • lifespan. Operates on 3-step or 5-step • ferroresonant or thyristor CCRs. • In compliance with FAA & IEC standards. Fully compatible with existing Airfield Lighting infrastructure. Installation on the same mounting device as most • conventional lights for a straightforward replacement. IP68: D

EL-RS LED Elevated Runway Threshold/End Light MAIN COMPONENTS OF THE LIGHT UNIT 1. Lens Ring 2. Lens 3. LED PCB 4. TIR 5. LED Heatsink 6. O-Ring 7. Top Plate 8. Board Heatsink 9. Main Body 10. O-Ring 11. Bottom Plate 12. Pipe Support 13. Pipe (OD 60 mm) 14. Breakable Coupling 15. Gland with Accessories 16. Lead Wire PHOTOMETRIC PERFORMANCE INSTALLATION SECTION Deep Base 12” and Base Plate Light White (with Heater) 55 VA 0.96 0.98