EL-RN
EL-RN
- The LED Elevated Runway End Light (EL-RN) complies with various international standards including ICAO Annex 14 - Volume I, FAA AC150/5345-46 & EB No.67D, EASA CS-ADR-DSN, IEC TS 61827, NATO STANAG 3316, and CAA CAP 168.
- The fixture can be installed on a baseplate or pipe elbow, with detailed instructions available in the user manual DC-MN-IN-12.
- Operates in temperatures ranging from -45 °C to +55 °C (-49 °F to +131 °F) and up to 100% humidity.
- Weight: 2.9 Kg
- Volume: 0.009 m³
- LED Unidirectional Elevated Light with an average lifespan of 60,000 hours at full intensity and over 100,000 hours in typical conditions.
- Low energy consumption compared to halogen lights, reducing the need for high-range CCRs and transformers.
- Compatible with existing Airfield Lighting infrastructure, allowing for easy replacement.
- IP68 rated for dust and water protection.
- Designed with fewer mechanical parts for affordability and longer maintenance intervals.
- Fully dimmable with variable light output similar to traditional halogen lights.
- Encapsulated electronics with optimized LED performance to prevent visual flickers.
- Built-in voltage surge and lightning protection.
- Includes components such as Lens Ring, LED PCB, TIR, Heatsinks, O-Rings, Top and Bottom Plates, Pipe Support, Breakable Coupling, and Lead Wire.
- Provides specific candela values at various angles, ensuring optimal visibility.
- Consumption at 6.6A: 15 VA without heater, 30 VA with heater.
- Power Factor: 0.98 without heater, 0.96 with heater.
Catalog excerpts
LED Elevated Runway End Light Aviasafe GmbH Headoffice • Designed with few mechanical parts, DE 60478 Frankfurt am Main/ Germany resulting in a more affordable price and DE 98597 Fambach Neue Wiese 2 allowing for longer maintenance • Fully dimmable lights. The light output is variable, similar to a traditional halogen light, operating within the 2.8 A to 6.6 A range. • The electronics are fully encapsulated. • Optimized LED performance ensures there are no visual flickers. • Built-in voltage surge and lightning protection. INSTALLATION The fixture can be installed on a baseplate or pipe elbow. Refer to the user manual DC-MN-IN-12 ENVIRONMENTAL CONDITIONS Temperature: -45 °C to +55 °C -49 °F to +131 °F Humidity: Up to 100% FEATURES & BENEFITS • LED Unidirectional Elevated Light. • Average LED life of 60,000 hours at full intensity but over 100,000 hours in Volume & WEIGHT Weight: 2.9 Kg Volume(m³): 0.009 typical operating conditions. • Very low energy consumption compared to halogen lights, resulting in a lower range of CCRs and • transformers. Low life cycle costs due to the long LED • lifespan. Operates on 3-step or 5-step • ferroresonant or thyristor CCRs. • In compliance with FAA & IEC standards. Fully compatible with existing Airfield Lighting infrastructure. Installation on the same mounting device as most • conventional lights for a straightforward replacement. IP68: D
Open the catalog to page 1
EL-RNLED Elevated Runway End Light www.aviasafe.de MAIN COMPONENTS OF THE LIGHT UNIT 1. Lens Ring 2. Lens 3. LED PCB 4. TIR 5. LED Heatsink 6. O-Ring 7. Top Plate 8. Board Heatsink 9. Main Body 10. O-Ring 11. Bottom Plate 12. Pipe Support 13. Pipe (OD 60 mm) 14. Breakable Coupling 15. Gland with Accessories 16. Lead Wire PHOTOMETRIC PERFORMANCE INSTALLATION SECTION Deep Base 12” and Base Plate Light White (with Heater) 30 VA 0.96 0.98
Open the catalog to page 2All Aviasafe GmbH catalogs and technical brochures
- Color light
- Airport lighting system
- Runway beacon
- Aircraft lighting system
- Approach beacon
- Helideck lighting system
- Position beacon
- Power supply
- Taxiway light
- AC/DC power supply
- Airport sign
- Runway sign
- PAPI light
- Passenger boarding bridge
- Boarding bridge
- Runway end identification beacon
- Heliport use light
- Boarding bridge with window walls
- Constant current power supply