*myaeroexpo

StrobeTailNano

Product catalog summary

1. STROBETAIL NANO
The StrobeTail Nano and PosiTail Nano are compact position and strobe light assemblies designed for aircraft with streamlined empennages. They comply with DO-160F and FAR requirements, making them suitable for night flying. These lights are part of Aveo's GreenAir™ eco-friendly series.

2. TECHNICAL SPECIFICATION
Dimensions are detailed in the technical drawing section. The lights weigh 95 g (3.35 oz) and operate on a nominal voltage of 9-36 Vdc. They feature voltage protection with a transcend voltage of 60V, under-voltage lockout at 9V, and over-voltage lockout at 36V. The strobe version outputs 0.735A/LED with a power of 27.5W. They have a warm-up time of less than 3 seconds and operate in temperatures from -40°C to +85°C. Overheat protection is set at +85°C.

3. CONTROL & POWER INPUTS
The lights have three wires: Yellow (VCC), Black (GND), and Blue (SYNC).

4. TECHNICAL DRAWING
Refer to the document for detailed technical drawings.

5. WIRING CHART
Refer to the document for the wiring chart.

6. TESTING THE FUNCTION OF THE AVEO AURORA SERIES LIGHTS BEFORE INSTALLATION
Aveo lights undergo extensive testing before release. To test the lights, connect the black wire to the ground and the yellow wire to the positive lead of a 12V/5A dc power supply. The blue wire is for synchronization. Do not use battery chargers or other power units outside the 9-32 Vdc range as it may void the warranty.

7. CARE AND CLEANING OF YOUR AVEO ENGINEERING AVIATION LIGHTS
Upon installation, apply a quality automotive polish to protect the lights. Refresh the polish monthly. For deeper cleaning, use automotive cleaner wax or liquid polishing compounds. Avoid petroleum-based products.

Catalog excerpts

1. STROBETAIL NANO If your aircraft has an extremely thin and streamlined empennage, the PosiTail Nano™ and StrobeTail Nano™ are the ultimate solution! As the world's smallest position and strobe light assemblies that meet all DO-160F and FAR requirements, these two lights will make your aircraft legal for night flying if your wing lights are not parallel to your aircraft centerline due to wingtip shapes. These lights also are part of Aveo's exclusive GreenAir™ earth friendly aviation lighting series. 2. TECHNICAL SPECIFICATION Dimensions (light): Weight: Nominal Operating Voltage: see section...

Open the catalog to page 3

6. TESTING THE FUNCTION OF THE AVEO AURORA SERIES LIGHTS BEFORE INSTALLATION All Aveo Aviation lights undergo rigorous testing prior to being released from our engineering manufacturing department. This testing involves a burn-in time as well as other function testing. No light is released for sale without undergoing this extensive operational testing. When you receive the Aveo Aurora Series Aviation Lights, and wish to test the function of the lights prior to installation on your aircraft, please note the following: 1. Please review the written information that is enclosed in the packaging....

Open the catalog to page 5

2. Remove the lights from the package. Note that there are three (3) wires coming from each light. These wires are: a. Black wire – Ground wire (negative lead) b. Yellow wire – Strobe light function wire (positive lead) c. Blue wire – used if the synchronization of the Aveo lights is selected 3. Testing of the function of the light can be done with a regular 12V/5A dc power supply (not a battery chargers). Connect the black wire to the ground (negative) leads of a power supply, then connect the yellow wire to the positive (+) leads on the power supply. The anticollision light should start flashing....

Open the catalog to page 6

StrobeTailNano

StrobeTailNano

Catalog excerpts

All AveoEngineering s.r.o. catalogs and technical brochures