*myaeroexpo

Samson Drop-In

1 / 16 PagesView full catalog

Samson Drop-In

Product catalog summary

Manual Administration

Document Approval: The manual is approved under EASA AP429 and applies to specific part numbers for Samson Drop-In Landing and Taxi lights.
Amendment Record Procedure: Amendments are tracked electronically, with changes highlighted in yellow.
Effected Pages Procedure: Lists pages affected by amendments, with details provided in a table.

Product Information

The Samson™ Drop-In PAR46 is an environmentally friendly replacement for legacy lights, using less power and being mercury and lead-free.
Main features include FAA-approved chromacity, optimized optics, and advanced LED power supply.

Wiring

Recommended wire size is 18 AWG. For AC lights, polarity is not a concern.

Technical Specifications

DC Version: Operates between +18..+36 VDC, with various protections and a peak intensity of 328,000 cd.
AC Version: Operates between +27..+29 VAC at 400Hz, with a peak intensity of 240,000 cd.
Both versions are RTCA/DO160 qualified across multiple categories, ensuring durability and safety.

Technical Drawing

Provides dimensions in mm and inches.

Wiring Chart

Details the wiring setup for installation.

Care and Cleaning

Lights are factory polished and should be cleaned with a lamb’s wool sheet. Avoid petroleum-based products.

Annexes

Include detailed candela distribution charts for both DC and AC versions in various configurations.

Catalog excerpts

Samson S45 INSTALLATION MANUAL AVE-S45-001-IM © 2015 Aveo Engineering Group, s.r.o. All rights reserved. The information contained within this document must not be disclosed, copied or reproduced in whole or in part without prior written permission from Aveo Engineering Group, s.r.o. Distribution of this document shall only be as stated in Table 02 unless otherwise agreed by Aveo Engineering Group, s.r.o.

Open the catalog to page 1

INSTALLATION MANUAL

Open the catalog to page 2

INSTALLATION MANUAL Manual Administration 0.1 Document approval This document has been established in accordance with an alternative procedure to DOA approved under EASA AP429. This installation manual is applicable for part numbers: • • • • Samson Drop-In Landing Samson Drop-In Taxi Samson Drop-In Landing 28VAC 400Hz Samson Drop-In Taxi 28VAC 400Hz 01. – Dec. - 2016 Petr Nezval Engineer, Aveo Engineering Group, s.r.o. 01. – Dec. - 2016 Georg Hartl Head of DO, Aveo Engineering Group, s.r.o. 0.2 Amendment Record procedure The master copy of this document shall be kept electronically as a read...

Open the catalog to page 3

INSTALLATION MANUAL 1. PRODUCT INFO Aveo Engineering introduces the exclusive next-generation Samson™ Drop-In PAR46 replacement for Legacy Lights. Environmentally Friendly The Samson uses far less power than competitive products illuminated by mercury-arc, high intensity discharge, or halogen lamps, which means they help to reduce air pollution from carbon emissions. Mercury and Lead-free, this RoHS compliant environmentally-friendly technology helps reduce power consumption and the amount of hazardous waste entering the environment. Finally, a "green" aircraft light! MAIN FEATURES: - FAA Approved...

Open the catalog to page 4

INSTALLATION MANUAL 3. TECHNICAL SPECIFICATION DC version Light characteristics: Landing Light / Taxi Light / PAR46 replacement Voltage range: +18..+36 VDC Voltage protection: a. Transcend voltage: 2 second +80V b. Under-voltage lockout: +18VDC, not more; c. Over-voltage lockout: +36VDC, not less. LED quantity: 45pcs Performance: a. Output current: 1.25A per LED b. Output power: 168W c. Input power: 200W +/- 5% Chromaticity: Cool White, Color shade 1C0 Intensity: 328.000 cd peak, see annex 1, 2, 3, 4 Viewing Angle: 12° Landing (symetrical) 40° Taxi (asymetrical) Low temperature slope start: -55°C...

Open the catalog to page 5

INSTALLATION MANUAL AC version Light characteristics: Landing Light / Taxi Light / PAR46 replacement Voltage range: +27..+29 V AC @ 400Hz Voltage protection: a. Transcend voltage: 2 second +40VAC b. Under-voltage lockout: +26VAC, not more; c. Over-voltage lockout: +30VAC, not less. LED quantity: 45pcs Performance: a. Output current: 0.85A per LED b. Output power: 113W c. Input power: 147,5W +/- 5% Chromaticity: Cool White, Color shade 1C0 Intensity: 240.000 cd peak, see annex 5, 6, 7, 8 Viewing Angle: 12° Landing (symetrical) 40° Taxi (asymetrical) Low temperature slope start: -55°C Ambient temperature:...

Open the catalog to page 6

INSTALLATION MANUAL

Open the catalog to page 7

INSTALLATION MANUAL 6. CARE AND CLEANING OF YOUR AVEO ENGINEERING AVIATION LIGHTS When you receive your Aveo Engineering Aviation Lights, they will have been factory polished and ready to install on the aircraft. If the lights require a deeper cleaning, they should be polished with a quality lamb’s wool sheet and can also be used for deeper polishing. Under no circumstances should any petroleum based product be used to clean the lights.

Open the catalog to page 8