HR
1 / 11Pages

Refuse Collection Vehicles Road and Airport sweepers Quality Management System Certificate ISO9001:2008 Modulo WASTE COLLECTION VEHICLE TO STANDARD EN 1501-1 2011 _ TECHNICAL AND FUNCTIONAL CHARACTERISTICS Sede legale : via Natta 15-17 36040 Brendola (VI) , Italia Capitale Sociale Euro 400.000 i.v. C.F. , P.Iva 00606250249 Reg. Imprese : R.E.A. VI 140594 Web: www.autobren.com Email : info@autobren.it

Refuse Collection Vehicles Road and Airport sweepers Quality Management System Certificate ISO9001:2008 Modulo DESCRIPTION AND CONSTRUCTION MATERIAL TAILGATE (Part 1) The tailgate contains the hopper of waste and packer plate and carriage plate (devices for transferring waste from the hopper to the body and to their compacting on the wall of the ejector plate. Metal bearing structure consists of tubular structural steel Fe510 B, with side plates in Fe510 B 5 mm thick and 5 mm thick wearresistant steel HARDOX450 .. Hopper (Part 5) wear-resistant steel Hardox 500 (minimum hardness HB500) 10...

Refuse Collection Vehicles Road and Airport sweepers Quality Management System Certificate ISO9001:2008 Modulo CARRIAGE PLATE (Part 3) Supporting structure in metal structure consists of tubular structural steel Fe 510 B and HARDOX400 that ensures durability and efficiency of the parts in direct contact with the waste. PACKER PLATE (Part 4) Tubular supporting structure in load-bearing steel Fe510B and coating with steel plate and anti-wear HARDOX400 (HB400), 5mm thick. LIFTING DEVICE IN ACCORDANCE WITH UNI EN 1501-5 (part 5) INTERFACE CHASSIS (Part 6 ) Structure for added strength...

Refuse Collection Vehicles Road and Airport sweepers Quality Management System Certificate ISO9001:2008 Modulo • Signalling functions and alarm. All commands and their stations are made in accordance with 1501-1_2011 All the electric and electronic components responds to the technical characteristics such as to ensure a orderly functioning for temperatures between -20 and +50 ° C. FUNCTIONING SCHEMES The equipment is equipped with a device for automatic adjustment of the speed of the motor which allows, with the insertion of the PTO, the attainment of the correct automatic rotation speed of...

Refuse Collection Vehicles Road and Airport sweepers Quality Management System Certificate ISO9001:2008 Modulo Ejector plate moved by hydraulic telescopic cylinder double acting, with extensions lapped and chromates, controlled by valve pre-calibrated to ensure against pressure during compaction, sliding on two lateral guides, coupled via four sliding blocks self-lubricating plastic material special antacid and wear NYLATRON PA6GMN. Ejector plate made of metal structural for support all stresses of compaction and unloading, it is consisting of structural steel tubular 4 mm thick Fe510B with...

Refuse Collection Vehicles Road and Airport sweepers Quality Management System Certificate ISO9001:2008 Modulo HYDRAULIC SYSTEM The plumbing is carried out in accordance with the UNI EN ISO 4413:2012Hydraulic fluid power – General rules and safety requirements for systems and their components The pressure is originated by 2 pumps driven by PTO on the gearbox applied: by PTO gearbox that manages the power taken from the engine of the vehicle is driven a hydraulic gear pump or vane which operates the compaction systems, a further dedicated pump drives the functions and discharge lifting...

Refuse Collection Vehicles Road and Airport sweepers Quality Management System Certificate ISO9001:2008 Modulo Questo circuito è strutturato in modo tale da non produrre cali di pressione che possano penalizzare l’impianto di produzione di aria compressa dell’autotelaio in relazione ai servizi propri dell’autotelaio stesso come prescritto dalla UNI EN ISO 4414:2012 Pneumatica - Regole generali e requisiti sicurezza per i sistemi e i loro componenti PNEUMATIC SYSTEM The pneumatic system installed on the compactor is fed from the compressor of the vehicle and allows the insertion of the PTO,...

Refuse Collection Vehicles Road and Airport sweepers Quality Management System Certificate ISO9001:2008 Modulo - Automatic central greasing system - Spoon 1000L integrated lifting device for manual transfer of waste from the bins 40L. - Cranes for lifting boxes or buried bells PROFILE MOTOR VEHICLE All mobile devices are provided for the collection are falling completely within the outline in the rest position, does not thereby creating protrusions especially in the rear area of the vehicle. STATIONS OF CONTROL SIDE RIGHT REAR CAP Pushbutton panel positioned in the rear area, from that...

Refuse Collection Vehicles Road and Airport sweepers Quality Management System Certificate ISO9001:2008 Modulo CABIN Control panel accessible from the driver and he can do the following operations: • Inserting the PTO; • Control of flashing headlights • Display monitor from the rear cargo area Optional on request: - Opening tailgate - Movement ejector plate - Partial closure tailgate - Enabling external commands - Display for abnormalities - Hours PTO - Display printer and weighing system - Key switch lock function compactor - Key switch for inhibition safety maintenance - Device...

Refuse Collection Vehicles Road and Airport sweepers Quality Management System Certificate ISO9001:2008 Modulo MODEL EQUIPMENT PRESSURE MAX PACKER PLATECARRIAGE PLATE 167 182 182 TARE EQUIPMENT APPROXIMATE (kg) Sede legale : via Natta 15-17 36040 Brendola (VI) , Italia Capitale Sociale Euro 400.000 i.v. C.F. , P.Iva 00606250249 Reg. Imprese : R.E.A. VI 140594 Web: www.autobren.com Email : info@autobren.it

Refuse Collection Vehicles Road and Airport sweepers Quality Management System Certificate ISO9001:2008 Modulo Sede legale : via Natta 15-17 36040 Brendola (VI) , Italia Capitale Sociale Euro 400.000 i.v. C.F. , P.Iva 00606250249 Reg. Imprese : R.E.A. VI 140594 Web: www.autobren.com Email : info@autobren.it