Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. ATTAX
  3. 505045909

505045909

505045909
1 / 1 PageView full catalog

505045909

Product catalog summary
Specifications:
  • Measurements and dimensions are provided in both metric and imperial units, such as 2,698 (68.5), 0,683 (17.4), 0,949 (24.1), 0,984 (25), 0,438 (R11.1), 1,743 (44.3), 1,000 (25.4), 0,315 (8), and 0,300 (7.62).
  • Weight is specified as 169 grams.
  • Material specifications include Steel 4140 per AMS 6349 and Steel 42CrMo4 per EN 10293.
  • Coating is Zinc Nickel Type II Grade B per AMS 2417.
Procedures:
  • Torque application is required for the REAR TRIPLE STUD FITTING.
Standards:
  • Material and coating standards are specified according to AMS and EN standards.
Recommendations:
  • Ensure torque is applied correctly as specified.
Additional Information:
  • Document date: 28/03/2019.
  • Load capacity is greater than 60 KN.
See more

Catalog excerpts

505045909-1

AMK rear triple stud fitting WEIGHT: 169 grs Characteristics Fitting class Torque (*) Indicated for other platforms, contact ATTAX for more information Zinc Nickel Type II Grade B per AMS 2417 Zinc Nickel Type II Grade B per AMS 2417 Technical data Safety indicator Yes Tool-less No Secured locking No Red Yes Quick release No Offset No Green No Positive engagement No Captive screw No 6, rue des Entrepreneurs - Zl les Amandiers 78420 Carrieres-sur-Seme- France Phone +33 161045 050 - Fax +33 161040 501 www.attax.com - [email protected]

 Open the catalog to page 1

All ATTAX catalogs and technical brochures

  1. 50T4R2002-ZN
    50T4R2002-ZN

    1  Page

  2. SINGLE & DOUBLE STUD
    SINGLE & DOUBLE STUD

    1  Page

  3. 505196909
    505196909

    1  Page

  4. E12281-V4
    E12281-V4

    1  Page

  5. TRACK FITTINGS RANGE 2017
    TRACK FITTINGS RANGE 2017

    24  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.