EDDY CURRENT TESTING
2Pages

{{requestButtons}}

Catalog excerpts

EDDY CURRENT TESTING - 1

Advanced Technology Group s.r.o. DESCRIPTION OF THE METHOD Eddy current testing method is used for testing electrically conductive materials within various fields of application. It is most commonly used for inspection of metallurgical semi-finished products, in-service inspections of tubular heat exchanger, and for aviation and automotive industry. The method belongs among so-called surface methods. Therefore it is often used for observation of surface imperfections. It is also capable of detecting imperfections in a certain depth beneath the surface (10 to 25 mm depending on material). Furthermore, the method can be applied to measu re the thickness of non-conductive coatings, or classify materials on the basis of their chemical composition or heat treatment. Its main advantages are testing rates, easy automated control and evaluation. DESIGN AND PRODUCTION In cooperation with ROHMANN GmbH, ATG offers complex solutions for NDT workplaces from simple devices up to complex systems. Our specialists will suggest the most suitable solution for your applications that can be stationary or portable devices such as: | Absolute probes | Multidifferential probes | Accessories | Standards and samples | Differential probes | Portable analog devices | Through-type probes | Special systems | Special probes | Portable digital devices | Rotary probes | Stationary systems ELOTEST M2V3 Suitable for detection of defects such as tears in aircrafts parts, automobiles and other means of transportation. Frequency mixing, material classification, and other applications are achievable. ELOTEST B300 Multichannel device suitable for use in aerospace, transportation, chemical, and power industry. A connection to videoscope is provided on demand. ELOTEST IS Multichannel device suitable for use in automotive and metallurgical industry. Inspection of bearings, rods, tubes, pins, pivots, pistons, shafts, gear wheals etc. ET - EDDY CURRENT TESTING

Open the catalog to page 1
EDDY CURRENT TESTING - 2

SELECTED SPECIAL APPLICATIONS Manual inspection of turbine blades. Automated inspection of camshafts. Automatic inspection of wheels, gearing, holes... SERVICES AND TESTING Various applications require different approaches and demands. ATG inspectors perform inspections of e.g.: Metallurgical semi-finished products on automatic lines by through-type probes and rotary heads (requirements are introduced in, e.g. EN 10 246-1,3) Tubes of heat exchangers by internal trough-type probes (requirements according to ASME VA/III or DIN 25435-6) Aircraft in-service (specific requirements of aircraft...

Open the catalog to page 2

All ATG Group s.r.o catalogs and technical brochures

  1. USPC 3200 P

    2 Pages

  2. Unimag Basic

    1 Pages

  3. UZM 1000

    2 Pages