ZA293
ZA293
The ZA293 is a low-intensity, omni-directional inset fitting designed for use in taxiways, helipads, and runway edges. It utilizes tungsten halogen technology and is manufactured by ATG Airports.
Features:
- Constructed from aluminum alloy for durability and lightness.
- Available in 8” 2-hole and 8” 3-hole versions.
- Long-life lamps with an objective life of 1500 hours at full brilliancy.
- Prism removal and replacement without adhesives or sealants.
- Color beam variations through dichroic coated or colored glass.
- Pre-focused optics for simplified maintenance.
- Low profile design (10mm) with a natural anodized finish.
Compliance:
- FAA AC 150/5345-46C L-852E, L-852F, F-852T.
- ICAO Annex 14 circular guidance.
- CAA CAP168 Table 6A/1.
- BS3224 Part 5, inset fittings.
- IEC 61827.
- STANAG 3316 Annex C fig 3.
Electrical Supply:
Compatible with 6.6A airfield lighting circuits, typically powered by 45W, 65W, or 100W isolating transformers. Available in 120V and 240V mains supply versions with power consumption ranging from 30W to 105W.
Applications:
Suitable for taxiways, helipads, and low-intensity runway edges.
Options and Accessories:
- Various seating pots (ZM109, ZM181, ZM203).
- PSA & FAA L868 cannister adaptors.
- Sighting devices and installation jigs.
- 500mm flying lead with 3-pin receptacle for specific voltage versions.
Packaging Data:
- Net weight: 3kg, Gross weight: 3.5kg.
- Carton dimensions: 230mm x 230mm x 146mm.
Components:
- Includes body casting, prism clamps, gaskets, glass prisms, reflectors, lamps, filters, and other essential components.
Installation Methods:
- ZA292 installed in ZM109 seating pot or ZM203(I) wet seating pot.
- Dry seating pot arrangement available.
- Installation on FAA L-868 base with optional earth terminals.
Catalog excerpts
Tungsten halogen technology ZA293 Runway Edge Low intensity omni-directional inset fitting Compliance with standards • Body casting manufactured from aluminium alloy for lightness, strength and durability • FAA AC 150/5345-46C L-852E, L-852F, F-852T • ICAO Annex 14 circular guidance 5.3.6, 5.3.9.8, 5.3.9.9 • CAA CAP168 Table 6A/1 Low intensity, taxiway edge and circular guidance • BS3224 Part 5, inset fittings • IEC 61827 • STANAG 3316 Annex C fig 3 • IEC body style as standard, 8” 2 hole and 8” 3 hole versions available • Long life lamps (objective life of 1500 hours at full brilliancy) • Prism removal and replacement achieved without the need for adhesive or sealants • 3 hole body option for direct installation to SRA8/13 adaptor ring • Colour beam variations achieved by dichroic coated or coloured glass • Lamp by-pass options available if required • Suitable for direct installation in a ZM109, ZM181 or ZM203 IEC seating pot with only two point fixing Omni-directional inset fitting for Taxiway, Helipad, LI Runway Edge and general applications. • Low profile (10mm) • Commonality of parts with the ZA181 and ZA280 inset fittings • Light channel within 5mm of Grade • Natural anodised finish (as standard), powder coated NATO green or golden yellow • IMM available on request Electrical supply Suitable for use in 6.6A airfield lighting circuits normally supplied from 1 x 45W, 65W or 100W isolating transformer. 120V and 240V mains supply versions also available. Power consumption is either 30W, 36W, 40W, 49W or 105W depending upon type of lamp fitted.
Open the catalog to page 1
Packaging data . ZM181 8" seating pot (dry) Gross weight 3.5kg • ZM203 (I) seating pot (dry) Carton size 230mm(w) x 230mm(d) x 146mm(h) • 500mm flying lead with 3-pin receptacle (120V and 1 Body casting (standard) 2 Prism clamp (standard) 3 Prism clamp gasket 10 Lamp retaining spring 11 Bottom cover casting (standard) or bottom cover spinning (SRA) 12 Bottom cover gasket 13 'B'type plug lead 14 Cable gland assembly @ www.atgairports.com SproductsPatgairports.com O sales-usa(a)atgairports.co
Open the catalog to page 2
Typical installation methods Secondary lead Dry seating pot arrangement also available 4. Outer earth terminal (optional) 5. Inner earth terminal (optional) Photometric performance ' Blue performance ' (CAP 168] Minimum average ipecification (FAA] Minimum Average ipecification , (STANNAG) Minimum tverage specification Intensity (Candelas] Lowton Business Park | Newton Road Lowton St. Mary's Warrington Fort Myers | Florida 33967 @ www.atgairports.com O products(a)atgairports.com O sales-usa(a)atgairports.com
Open the catalog to page 3
