- Catalogs
- ATG AIRPORTS LIMITED
- M8536FL
M8536FL
M8536FL
The M8536FL 8.5m Floodlit Windsock Mast is a product by ATG Airports, widely used in UK airports and internationally. Known for its reliability and low maintenance, the mast is designed and manufactured in the UK.
Design & Compliance:
The mast design meets several international standards, including ICAO Annex 14, CAA CAP168, and FAA AC 150-5345-27d. It has been tested to withstand winds up to 120mph and features a tilt-down design.
Mast Specifications:
- Fabricated from mild steel and galvanized to BS 1729 standards.
- Features a base post and various SHS box sections.
- Can be operated by one person using an auto-braked winch.
- Includes a mast lock and frangibility feature for safety.
- Powder-coated in red and white bands as per ICAO standards.
Lighting System:
- Equipped with four wide beam LED floodlights for 360-degree illumination.
- Total power consumption is under 130W.
- Compliant with CAP 168 Appendix 7D.
- Lamps have a 50,000-hour lifespan and are weatherproof to IP65.
- Includes a 100k hour LED Obstruction Light.
Electrical Control System:
- Features a double switch for independent control of lights.
- Includes a photocell for automatic lighting control.
- Power distributed via a junction box at the mast top.
Windsock & Swivel Frame:
- Standard windsock is 3.6m long with a 0.91m diameter.
- Made from dayglow orange polyester, with optional red & white banding.
- Designed to prevent flutter and maximize responsiveness.
- Swivel frame made from 316 stainless steel with zero maintenance bearings.
Installation:
- Comes with complete installation instructions.
- Includes a galvanized ground socket for easy relocation.
Catalog excerpts
M8536FL 8.5m Floodlit Windsock Mast atg airports windsock mast is installed at many UK airports and a wide range of When first designed and tested, lighting trial results, night overseas countries from Oman to Singapore. The oldest masts are now approaching 20 photos and video were taken to the CAA where they were assessed satisfactory and confirmed they met CAP 168 Appendix 7D requirements. This tilt down design has years combining a reliable service with low withstood recorded 120mph wind. maintenance. All our windsock masts and The mast also complies with ICAO Annex 14, CAA CAP168, FAA AC 150-5345-27d (Type L807, Size 2, Style I-A) and MADS Chapter 6 & 7 requirements. Floodlit Windsock Mast
Open the catalog to page 1
8.5m Floodlit Windsock Mast Electrical Control System: } masts are fabricated from mild steel, then All galvanised to BS 1729. } double switch is provided on the Base Post to A allow control of the Obstruction Light and Floodlighting independently. The floodlighting is also controlled by a photocell mounted beside the switches. } Base Post 90mm x 6.3mm SHS } Mast 90mm x 3.6mm / 80mm x 3.6mm / 70mm x 3.6mm SHS box section & 60mm RHS tube. } The mast can be safely lowered and raised by one man using the auto-braked winch. } The light arms can be rotated to service any of the lamps from the ground....
Open the catalog to page 2
