Catalogs >
ATEQ >
PITOT STATIC TESTER | ADSE743

PITOT STATIC TESTER | ADSE743
1Pages

Catalog excerpts

HANGAR / TARMAC ^ ALTIMETERS TESTING ^ AIRSPEED INDICATORS TESTING ^ VERTICAL SPEED INDICATORS TESTING ^ AIR DATA COMPUTERS TESTING ^ PRESSURE SENSORS TESTING ^ LEAK TESTER RVSM COMPLIANT Main Features • Built-in pressure and vacuum pumps • Liquid crystal colour display with touch sensitive screen for operator instructions/help • Remote control unit based on Windows CE tablet PC • Complete self check of set before use • High accuracy, high resolution • RVSM compliant • Programmable leak test • Programmable flight envelope to protect equipment under test • All four primary flight parameters displayed simultaneously • Programmable (password write protected) test schedules • Selectable pressure units: hPa; mb; in Hg; mmHg; ft; m; kts; km/h, ft/min; hm/min, Mach number The ADSE 743 caters fully for all aircraft types and the different electrical power supplies. It can be used for testing high performance civil and military aircraft, fix and rotary wing. This Pitot Static tester is designed primarily for flightline use to cover the testing of all barometric and manometric pressure instrument systems. The large touch screen display, with on-screen help, enables all checks to be carried out easily on the flight deck or in the cockpit, by a single operator. The test set is robust and housed in a mobile weatherproof case. An attached bag contains the pressure hoses and electrical cables. Accessories to suit specific applications may be supplied. Temperature range Operating -10° to 50°C (14° to 122°F) Case Completely weatherproof, meets EMC requirements Calibration Recommended period 12 months Ease of Use Remote touch screen Integrated bag for cables and hoses Ease of maintenance Maintenance limited to calibration, regular external cleaning and exchange of filters (with the calibration) Optional DC Power supply: 17 to 32V DC Remote Control Software for PC (Windows CE) Bigger Pumps: 80,000ft - 15,000ft/min (up to 100,000ft - 60,000ft/min (Volume dependant)) Low range Pt sensor: 350 kts max for better accuracy Measurement specification in standards conditions Function Range Accuracy Indicated 10 to 800 kts + 1kt at 50kts(7 0.5kts at 50kts optional) (0.1 to 10 Mach optional) + 0.002M at 1,7M/30,000ft - Continuiting development sometimes necessitates specification changes without notice. - Special options can be analyzed and developped on request. Typical screen display ATEQ Omicron - Test instruments for all aircrafts ADSE

Open the catalog to page 1