Catalogs >
ATEQ >
EEST 50-60 workshop

EEST 50-60 workshop
2Pages

Catalog excerpts

EEST 50-60 BATTERY TESTER SERIES WORKSHOP EDITION / STAND ALONE UNIT COMPUTERIZED TEST BENCH FOR BATTERY MAINTENANCE BATTERY TYPES → SWITCHED MODE POWER SUPPLY → Mains Characteristics Software interface • 1 channel of charge/discharge 50V / 60A Main powers available are indicative ones (Voltage and intensity in charge and discharge on each channel can be adapted upon request) • Immediate or delayed test start. • Control of voltages under 16 bits. • Temperature Measurement with type K thermocouples. • Alarm for electrolyte level. • Shut down at predefined voltages Min, Max or delta V. • Shut down as a function of time - Protection against temperature defect. • Set up of multiple cycles and / or sequences • Functioning in “local” mode, electronic management, if computer failure. • Possibility of controlling the EEST from a remote location. • Printing and automatic filing of data at the end of the test. • Data protection and results saving and backup in case of power shutdown. • Test result storage and research by user defined criteria. • Curves drawing per phase. Option • Connection systems for battery elements voltage, measurement or deep discharge Typical screen display ATEQ Omicron

Open the catalog to page 1

1 to 12 channels of independent measures FUNCTION Characteristics ©: Standard O: Option Channel selection © Selection of one channel available even if others are in use Charging phase © Constant or variable Intensity/Voltage © Adjustable from PC, profile, EXCEL file © On I constant, or variable, limit U max, -AV, time, temperature min and max, AT°/At © On U constant, or variable, limit I min, times AI (%), temperature min and max, AT°/At © Temperature protection probe type K, adjustable O Elements voltage measurements and stop or stand by on elements voltage Discharging phase © Constant...

Open the catalog to page 2