Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. APERAM ALLOYS IMPHY
  3. NICRIMPHY 600

NICRIMPHY 600

NICRIMPHY 600
1 / 1 PageView full catalog

NICRIMPHY 600

Product catalog summary
Product Overview:
Nicrimphy 600 is a nickel-chromium alloy known for its excellent corrosion and oxidation resistance, as well as its robust mechanical properties across a wide temperature range. It is utilized in various industries including automotive, aerospace, chemical, food, and pharmaceuticals.
International Standards:
- Werkstoff Nr 2.4816
- ASTM B168
- UNS N06600
- AMS 5540
Chemical Composition:
- Nickel (Ni): 72.0% minimum
- Chromium (Cr): 14.0 – 17.0%
- Iron (Fe): 6.0 – 10.0%
Physical Properties:
- Density: 8.43 g/cm³
- Melting Temperature: 1370 - 1425°C
- Coefficient of Thermal Expansion (20-100°C): 13.3 x 10-6 °C-1
- Resistivity at 20°C: 103 µΩ.cm
- Thermal Conductivity: 14.7 W/(°Cm)
- Specific Heat at 20°C: 460 J.Kg-1.°C-1
- Non-magnetic
Mechanical Properties (Typical Values):
- Temper: Annealed
- Hardness: 160 HV
- Tensile Strength: 650 MPa
- Yield Strength: 300 MPa
- Elongation: 35%
Standard Delivery Form & Dimensions:
- Form: Coil, Sheet
- Thickness: 0.10 to 1.6 mm
- Width: 10 to 640 mm
- Length: 500 to 3500 mm
- Temper: Annealed
Note: Thickness greater than 1.6 mm or hard condition available upon request.
Additional Information:
The data provided are indicative and correspond to standard products. Specific requirements are subject to discussion and formal approval by Aperam Alloys Imphy. For further information or special requests, contact Aperam Alloys Imphy.
See more

Catalog excerpts

NICRIMPHY 600-1

Cold Rolled Strip Nicrimphy 600 is a nickel chromium alloy designed to offer good corrosion and oxidation resistance. It has also good mechanical properties over a wide range of temperatures. Nicrimphy 600 is used for: automotive industry (airbag components, heat screens, gaskets, exhaust systems..), muffles, furnace components, heating elements, aircraft industry, chemical industry, food and pharmaceuticals industries. International standards Chemical composition (% weight), main elements Physical properties Coefficient of Thermal Expansion between 20 and 100°C (10-6.°C-1) 13,3 Thermal conductivity (W/(°Cm)) Mechanical properties (Typical values) Standard delivery form & dimensions Form * Thickness (mm) Width (mm) Length (mm) Temper * Depending on thickness, width & temper Nicrimphy 600 can also be delivered in thickness higher than 1,6mm or in the hard condition, upon request The data enclosed in this document are only given as indicative values and correspond to our standard product. Different specific requirement are subject to discussion and formal approval by Aperam Alloys Imphy. For further information or special request, please contact us. Aperam Alloys Imphy B.P. 1 Avenue Jean Jaures F- 58160 Imphy

 Open the catalog to page 1

All APERAM ALLOYS IMPHY catalogs and technical brochures

  1. AFK® 18
    AFK® 18

    1  Page

  2. AFK® 1
    AFK® 1

    1  Page

  3. SY 718
    SY 718

    2  Pages

  4. Superimphy®625
    Superimphy®625

    8  Pages

  5. Welding Alloys Wire Rods
    Welding Alloys Wire Rods

    2  Pages

  6. Expansion Alloys and Magnetic Alloys Wire Rods
    Expansion Alloys and Magnetic Alloys Wire Rods

    2  Pages

  7. Special Stainless Steels Wire Rods
    Special Stainless Steels Wire Rods

    2  Pages

  8. Corrosion and Oxidation Resistance Alloys Wire Rods
    Corrosion and Oxidation Resistance Alloys Wire Rods

    2  Pages

  9. Nickel Iron and Cobalt Iron Cold Rolled Strips
    Nickel Iron and Cobalt Iron Cold Rolled Strips

    5  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.