MicroSol® 515 Cutting and Grinding Fluid Concentrate TRIM® MicroSol® 515 is a medium to high lubrication, semi-synthetic microemulsion coolant. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you would expect from a premium TRIM® coolant. While it is particularly well suited for machining and grinding cast iron it does very well in mixed metal situations and is a proven performer when machining aluminium, inconel and titanium alloys. MicroSol For ultimate performance: TRIM® MicroSol® semisynthetic microemulsion coolants deliver highperformance lubricity and ultimately lowers costs. Achieve precision parts, exceptional tool life, extended sump life, assured regulatory compliance, and greater profitability with the MicroSol product just right for your production. Designed to meet the rigorous demands of the aerospace, medical, automotive, and high production, precision parts manufacturing industries, there's a MicroSol to answer your concerns, ramp up your production, and boost your bottom line. Choose MicroSol 515: Medium to high levels of lubrication without chlorinated or sulphurised EP additives Compatible with aluminium, all steels, yellow metals and cast iron Extremely hard water tolerant Alternative to emulsion products for machining of high silica aluminium alloys Fine soluble oil emulsion reduces carryoff for low total operating cost Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention No aggressive biocides Easily recycled or disposed of without special handling or equipment Contains no DEA, chlorine, sulphur, nitrites, formaldehyde releasers, or phenolic compounds MicroSol 515 especially for: Applications — band sawing, belt grinding, Blanchard grinding, corrosion inhibition, cylindrical form grinding, double disc grinding, drilling, high-pressure, highvolume, in-feed centerless grinding, internal grinding, plain grinding, reaming, roll threading, surface grinding, surface milling, tapping, thread forming, through-feed centerless grinding and turning Metals — aerospace aluminium alloys, brass, bronze, cast iron, copper and ferrous metals Industries — aerospace, compressor, energy, firearms & ammunitions, machine tool manufacturers and medical MicroSol 515 is free of — chlorinated EP additives, DEA, formaldehyde releasers, nitrites and sulphurised E

MicroSol® 515 Cutting and Grinding Fluid Concentrate Concentration by % Brix TRIM MicroSol 515 will run effectively for long periods without the need for costly additives. It can run at lower concentrations for higher speed operations (where heat removal is the key issue). Higher concentrations are recommended on soft, gummy materials and for lower speed operations where friction reduction and control of built-up edge are critical. Concentrations above 7% provide the best sump life. For additional product application information, including performance optimisation, please contact your Master...

MicroSol® 515 Cutting and Grinding Fluid Concentrate Mixing Instructions Recommended usage concentration in water: 3.0% - 10.0%. To help ensure the best possible working solution, add the required amount of concentrate to the required amount of water (never the reverse) and stir until uniformly mixed. Use premixed coolant as makeup to improve coolant performance and reduce coolant purchases. The makeup you select should balance the water evaporation rate with the coolant carryout rate. Use our Coolant Makeup Calculator to find the best ratio for your machine: apps.masterfluidsolutions.com/makeup/....