W200 Manual Spray Gun
1Pages

> MANUAL SPRAY GUNS HIGH T.E.C. CERTIFICATE OF COMPLIANCE We certify that we have tested the Anest Iwata High T.E.C. W 200 suction spray gun in accordance with ASTM Designation: D5286-95 Tests for transfer efficiency and that this spray gun complies with the requirements of the Environment® Protection Act 1990, Part I -1997 Revision as detailed in PG6/34(97), PG6/23(9 j| PG6/40(94), PG6/41 (94). Transfer efficiencies achieved with the materials detailed in the test repl PRIMER 95.2% CLEAR LACQUER 77.4% // / ' Signed for MIRRC THATCHAM: REPAIR RESEARCH CENTRE Colthrop Way. Thatcham, Berkshire, RG19 4NR U. We certify that we have tested the Anest Iwata High T.E.C.W200A/VA200/WRA200 pressure feed spray guns in accordance with ASTM Designation: D5286-95 Tests for transfer efficiency and that these spray guns comply with the requirements of the Environmental Protection Act f 990, Part I -1997 Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: PRIMER 93.2% Signed for MIRRC THATCHAM: .. .M. Smith Chief Executive REPAIR RESEARCH CENTRE Collhrop Way, Thatcham. Berkshire, RG19 4NR U.K. declaration of ATEX conformity for use in zone 1 and in zone 2 Max. Working Pressure: 6.8 bar (98 PSI) Noise Level (LAeqT) 81.2 dB (A) Temperature range: 5~40° C Air nipple: G 1/4” Fluid nipple: G 3/8” ANEST IWATA U.K. Ltd. Distributed by: