Tie Down & Net Hardware - 6 Pages

Add to MyAeroExpo favorites
Tie Down & Net Hardware

Catalog excerpts

Tie Down & Net Hardware Certified and documented Ancra certified products are offered under FAA regulations and military and industrial standards. All parts carry full traceability and documentation. Overcenter Buckle — This unique 1" buckle features both simplicity and easy operation. Tension is applied by pulling web handhold and rotating lever. The lever is self-closing and will automatically rotate to full closed, detent position. Release is accomplished by pulling upward on the web handhold. The bottom surface is cushioned by the webbing. Meets FAA requirements for use on straps and nets. 42816-20 1" Overcenter Buckle Finish: Zinc plated per ASTM B633, Class Fe/Zn, Type VI, trivalent gold chromate (RoHS compliant). Load Capacity: 1,800 lb Weight: .15 lb Hooks — Used in a variety of strap and net applications for securing cargo. 48559-10 Wire Hook, Narrow, NAS 1211D10 Material: .25" diameter high strength steel wire Finish: Cadmium plated per AMS-QQ-P-416, Type II, Class 3, Gold Chromate Load Capacity: 3,000 lb Weight: .10 lb 44192-12 Flat Hook w/keeper Finish: Zinc plated and meets RoHS & “Green Airplane” requirements for environmentally friendly materials. Load Capacity: 3,000 lb Weight: .14 lb

 Open the catalog to page 1

Rings — Used in a variety of tie down strap and net applications. Other sizes and styles may be available on special request and subject to minimums. 40053-11 D-Ring, 1" Meets all NAS 1382-1 requirements except plating. Is zinc plated versus cadmium for NAS. Load Capacity: 1,800 lb Weight: .03 lb 48557-10 D-Ring, 1" Meets requirements for NAS 1211A10, except wire diameter. Ring uses .25" wire dia. where NAS calls for a wire diameter of .23". Finish: Cadmium plated per AMS-QQ-P -416. Type II, Class 3, Gold. Load Capacity: 5,000 lb Weight: .07 lb Ø.25 40171W28-8 Round Ring, Welded Made from...

 Open the catalog to page 2

Breakaway Fittings — These fittings are desirable in some strap assemblies to eliminate the need for an additional buckle. Tensioning of straps is accomplished by pulling the handhold. The fitting is released by lifting the spring-loaded retainer and sliding the fitting free of the track. Sideplates, stud, and cross pins are heat treated alloy steel and cadmium plated. Retainers are heat treated cast steel. Other styles may be available on special request and may be subject to minimums. 40041-10 Breakaway Fitting, Adjustable 40041-26 Breakaway Fitting, Nonadjustable w/D-Ring 40041-55...

 Open the catalog to page 3

Single Stud Cargo Fittings — These fittings are normally used in strap and net applications to attach to track and anchor plates. Fits aircraft seat track with the track cross section per MS33601, narrow profile aircraft track and 40000 anchor plates. The fitting is easily inserted into and removed from the track by simply lifting the spring-loaded retainer and sliding the fitting in the track. Studs are heat treated steel alloy, retainers are cast steel, rings and springs are stainless steel. Other styles may be available on special request and may be subject to minimums. 40340-20 Single Stud...

 Open the catalog to page 4

Single Stud Cargo Fittings — Continued 40506-11 Single Stud Fitting w/Aluminum Retainer Constructed with steel stud, stainless steel ring and spring and aluminum retainer Finish: Steel components are zinc plated per ASTM B633, Type II, Class Fe/Zn 8. Stainless steel components are passivated per MIL-S-5002A. Aluminum component is anodized per MIL-A-8625, color green. Load Capacity: 4,000 lb.vertical, 3,000 lb at 45° angle and 2,000 lb horizontal. Weight: .10 lb Double Stud Cargo Fittings — Double stud fittings for use in strap, net or bulk cargo restraint applications. Fittings attach to...

 Open the catalog to page 5

TIE DOWN & NET HARDWARE Adjustable Snap Latch — Can be used in some applications to eliminate the need for an additional tensioning buckle. Designed for use with one inch webbing. Tensioning of the strap is accomplished by pulling the handhold. 45387-10 Adjustable Snap Latch Finish: Zinc plated per ASTM B-633, Type II Load Capacity: 1,500 lb when used with Type XVII webbing per MIL-W-4088 Weight: .17 lb down applications on straps and nets. Footman’s Loop — Used in a variety of light duty tie 43977-10 Footman's Loop, 1" Finish: Cadmium plated per AMS-QQ-P-35, Type II, Class 3 and baked....

 Open the catalog to page 6

All Ancra International catalogs and technical brochures

  1. Nets & Straps

    2 Pages