PANEL & STANCHION FITTINGS Panel & Fittings Stanchion Quality is built in, not added on Safe, strong and reliable product systems require quality components. At Ancra, our experts monitor the entire manufacturing process through the AS9100 Quality Assurance System, the highest achievable quality system for aerospace and aviation companies. Threaded Studs — These multi-purpose, semi-permanent interior track fittings are specifically designed to be threaded into the part to be mounted. Designed as an interior tie down incorporating a steel stud and retainer for use where multiple attachments are required. Other sizes and variations may be available on special request and may be subject to minimum quantities. 40073-11 Threaded Stud w/knurled nut 40073-13 Threaded Stud w/2 knurled nuts 40073-14 Threaded Stud w/2 knurled nuts 40073-16 Threaded Stud w/2 knurled nuts 40073-20 Threaded Stud w/2 hex nuts 40073-31 Threaded Stud w/knurled nut 40073-32 Threaded Stud w/knurled nut Thread size: 3/8-24 UNF-3A Finish: Cadmium plated per AMS-QQ-P-416 Load Capacity: 4,000 lb vertical and horizontal Weights: See Table 40351-10 Threaded Stud 40351-11 Threaded Stud Thread Size: 3/8-24 UNF 3A Finish: Cadmium plated per AMS-QQ-P-416. Load Capacity: 4,000 lbs in any direction. Weight: -10: .09 lb, -11: .10 lb 40352-10 Threaded Stud Thread Size: 3/8-24 Ref Finish: Cadmium plated per AMS-QQ-P-416, Type II, Class 1 and baked. Heat treated components per AMS-H-6875 Weight: .06 lb ANCRA INTERNATIONAL • AIRCRAFT INTERIORS SPECIALTY HARDWARE

PANEL & STANCHION FITTINGS Threaded Studs — Continued .36 .38 43112-11 Threaded Stud Thread Size: 3/8-24 UNF-3A Finish: Cadmium plated per AMS-QQ-P-416, Type II, Class 3 and baked. Heat treated components per AMS-H-6875 Weight: .07 lb Threaded Double Studs — This series of fittings provides track attachment capabilities for a wide range of interior applications. The threaded stud is installed into the item to be mounted, and held in position with a locknut and retainer. Offset configurations are available for those applications where floor attachment space is restricted. Other sizes, finishes and...

Threaded Double Studs — Continued Standard Configuration Threaded Stud, Standard Configuration Threaded Stud, Standard Configuration Threaded Stud, Standard Configuration Threaded Stud, Standard Configuration Threaded Stud, Standard Configuration Threaded Stud, Standard Configuration Threaded Stud, Standard Configuration Threaded Stud, Standard Configuration Threaded Stud, Standard Configuration The body is one-piece steel forging, heat treated and cadmium plated. The retainer is alloy steel. Finish: Cadmium plated per AMS-QQ-P-416, Type II, Class 3, Gold Chromate and baked. Load Capacity: 6,500...

Threaded Base, Flush — These low profile fittings are designed for use where added clearance is required. 42182-10 Fitting Assembly, Flush Mount 42182-11 Fitting Assembly, Flush Mount 42182-50 Fitting Assembly, Flush Mount Thread Size: 1/4-28 UNF-3B for -10 & -50 5/16-24 UNF-3B for -11 Finish: -10 & -11 are Cadmium plated -50 is Zinc Nickel plated Load Capacity: 4,300 lb vertical, 1,700 lb horizontal Weight: .05 lb FWD 44413-10 Fitting Assembly, Flush Mount w/UNF thread 44413-11 Fitting Assembly, Flush Mount w/UNJF thread Thread Size: 5/16-24 UNF-3B for -10 5/16-24 UNJF-3B for -11 Finish: Cadmium...