Catalog excerpts
r ALTHEN SENSORS & CONTROLS GL7000 Modular Data Platform • Measurement ranges: ±20 mV ... ±100 V, thermocouples, Pt100, JPt100, Pt1000, humidity, strain gauge, vibration sensors • Measurement channels: up to 112 • Resolution: 16 bit • Sampling rate: 10ps to 1h per channel (dep. on module) • Interface: Ethernet, USB • Operation: stand-alone, PC based, FTP, HTTP FEATURES • 7 types of Input Modules for Voltage, Temperature, DC Strain, Vibration and Logic/pulse available • 4 types of Function Modules: Display, SSD, Alarm, Voltage Output • Up to 10 modules can be attached. • Flexible module combination allows a wide variety of measurements • Attaching the high-definition display module with touch panel allows both stand-alone operation and embedding into a system. • 2 interfaces for connection to your PC: USB 2.0 and Ethernet • 4 destinations to save the recorded data: build-in RAM, build-in Flash memory, SD memory card and SSD module
Open the catalog to page 1r ALTHENSENSORS & CONTROLS FOUR DESTINATIONS TO SAVE CAPTURED DATA 1. Built-in RAM RAM is built into each amplifier module to allow saving up to 2 million samples. Increasing the number of channels does not decrease the data capture duration. 2. Built-in Flash Memory The 2GB of flash memory is built into the main module. The captured data can be saved directly to the built-in flash memory when the sampling is not faster than 1 ms (sampling speed 1 kSamples/s). Saved data is retained even when the power is turned off because flash memory is used. 3. SD Memory Card SD card slot (supports...
Open the catalog to page 2r ALTHENSENSORS & CONTROLS USEFUL FUNCTIONS Backup Settings The GL7000 has a function that periodically backs up recording data (refer to the chart below). Here the user can set the conditions for data backup. • You can not specify the same location as backup destination and recording destination. • When the recording format is "CSV", the backup function is not available. • When ring recording is set to on, the backup function is not available. FTP (the recording data can be backed up to an external storage device) Input/Output Cable Connection for GL Trigger and exterior sampling input and...
Open the catalog to page 3r ALTHEN SENSORS & CONTROLS Main Unit Specifications Parameter Number of module Number of input channels External Input Input/Qutput Signal?" Output Trigger action Trigger repeat Trigger source Tugger I rigger, determination function measured signal Alarm determination condition '5 Alarm output Pre-trigger -fi Calculation Between charnels function Statistical Move function of the display range Search function Annotation function Message / Maiker Functions Resume Interface to PC Network function USB drive made Built-In External'ia Captured data Data in htulr-in RAM Auto save 'in Description...
Open the catalog to page 4r ALTHEN SENSORS & CONTROLS Hun module- Appro: 193 sc lil k 160 mm (Excluding Projection),
Open the catalog to page 5Active modular enclosure for wiring of an active transducer/sensor with voltage output in 3-wire technology Active modular enclosure for the connection of passive strain gauge transducers/ sensors Active modular enclosure with base rack for up to 4 8B-module amplifiers, 8B modules for different sensors and signals Transportation case K-type thermocouple, rod-shaped, cable length 1.1 m K-type thermocouple for static surfaces, cable length 1.1 m L-type thermocouple for static surfaces, L-shaped, cable length 1.1 m K-type thermocouple with adhesive pad, cable length 2 m, set oF 5 pieces K-type...
Open the catalog to page 6All Althen Sensors & Controls catalogs and technical brochures
-
SGR510/520 Torque Sensor
10 Pages
-
GLET SERIES
18 Pages
-
GLET-10xB530AH(T)-Bi12-Bi5
1 Pages
-
PetitLOGGER GL100 SERIE
2 Pages