Standard Flat Rolled Products

Standard Flat Rolled Products Tempers Current tempers The temper designations for aluminium or aluminium alloy cold rolled products are identical to those registered to the Aluminium Association, Wahsington DC 2006, USA, for the corresponding alloys and thicknesses. There may be produced sheets and strips in any intermediate or alternative temper, provided by any product standard F as fabricated O annealed H strain-hardened H1x strain-hardened only H2x strain-hardened and partially annealed H3x strain-hardened and stabilized H111 annealed and slightly strain-hardened (less than H11) during subsequent...

Thickness Width Thickness Width 1. Chemical compositions, delivery tempers, mechanical properties, dimensional tolerances, surface conditions, etc. are according to the relevant standards (the la test editions): EN 573-3, EN 515, EN 485-1, EN 485-2, EN 485-3, AA, ASTM B 209, ASTM B 928/B 928M, AMS-QQ-A-250A, AMS-QQ-A-250/4A, AMS-QQ-A-250/6A, AMS-QQ-A-250/12, AMS-QQ-A-250/30, AMS 4025L, AMS 4026M or AMS 4027N - from case to case. 2. 6061-T651 plates according to AMS 4027N standard are in thickness range 6.3 - 240 mm (0.250" - 9.4"). 3. For the whole thickness range, plates can be offered...

Standard Flat Rolled Products Coils Alloy Stucco, Diamond and Fluted pattern embossed sheets and coils, 0.25 ± 0.05 mm embossed depth, thickness range = 0,4 - 1,2 mm, width = 900 - 1500 mm (for 1xxx aluminium), width = 900 - 1250 mm (for 3003, 3004, 3103, 3105, 5005, 5049, 5050 alloys), length (sheets) = 900 - 6000 mm Tread plates and strips with 5 and 2 bars pattern, height of bars = 1.1 – 1.5 mm, 1xxx aluminium nominal thickness (not including height of the bars): 1,5 mm ≤ thickness ≤ 3,5 mm, width = 900 - 1500 mm, length = 2000 - 4000 mm nominal thickness (not including height of the bars):...