Primary Aluminium Wire Rod
1 / 2 PagesView full catalog
Primary Aluminium Wire Rod
Product catalog summary
Product Overview
Primary Aluminium Wire Rods are available in diameters of 9.5, 12.0, 15.0, and 19.0 mm. The coil weights are 2000 kg and 3000 kg, with maximum coil diameters of 1450 mm and 1660 mm. The aluminium purity is a minimum of 99.7%.
Primary Aluminium Wire Rods are available in diameters of 9.5, 12.0, 15.0, and 19.0 mm. The coil weights are 2000 kg and 3000 kg, with maximum coil diameters of 1450 mm and 1660 mm. The aluminium purity is a minimum of 99.7%.
Chemical Composition
The chemical composition adheres to EN AW1370 in EN 573-3:2007 standards, with aluminium at a minimum of 99.7% and impurities such as Si, Fe, Cu, Mn, Mg, Cr, Zn, and B at specified maximum percentages.
The chemical composition adheres to EN AW1370 in EN 573-3:2007 standards, with aluminium at a minimum of 99.7% and impurities such as Si, Fe, Cu, Mn, Mg, Cr, Zn, and B at specified maximum percentages.
Mechanical and Electrical Characteristics
The tensile strength (Rm) ranges from 80 to 130 MPa depending on the temper (H11 to H14). Typical elongation (A₁₀₀) values range from 13% to 25%. Resistivity is consistent at 2.801 µΩcm, and conductivity is at least 61.5% IACS.
The tensile strength (Rm) ranges from 80 to 130 MPa depending on the temper (H11 to H14). Typical elongation (A₁₀₀) values range from 13% to 25%. Resistivity is consistent at 2.801 µΩcm, and conductivity is at least 61.5% IACS.
Coil Dimensions and Weight
Coil dimensions vary with inner diameters of 560 mm and 760 mm, maximum outside diameters of 1450 mm and 1660 mm, and heights of 860 mm. Packaging can be customized to horizontal or vertical axis based on customer requirements.
Coil dimensions vary with inner diameters of 560 mm and 760 mm, maximum outside diameters of 1450 mm and 1660 mm, and heights of 860 mm. Packaging can be customized to horizontal or vertical axis based on customer requirements.
Standards and Certifications
The product complies with analysis methods such as ASTM E 1251-07, EN 10002-1:2001, ASTM B 557:2006, and ASTM B 193:2002. Certifications include OHSAS 18001, ISO 14001, and ISO 9001.
The product complies with analysis methods such as ASTM E 1251-07, EN 10002-1:2001, ASTM B 557:2006, and ASTM B 193:2002. Certifications include OHSAS 18001, ISO 14001, and ISO 9001.
See more
Catalog excerpts
Wire diameters Coil weight Coil diameters Min. Al
Open the catalog to page 1
Chemical composition - corresponding to EN AW1370 in EN 573-3:2007 in Mass % Analysis method: optical emission as per ASTM E 1251-07 Mechanical and electrical characteristics Metallurgical delivery temper Mechanical characteristics* Electric characteristics * (temperature 20°C) Typical elongation Aioo [%] Resistivity [gQcm] Conductivity [% iacs] •Analysis method: EN 10002-1:2001 ASTM B 557:2006 •Analysis method: ASTM B 193:2002 According to the diameter, the metallurgical tempers which may be produced are as follows: Diameter Diameter Metallurgical tolerances deliver temper 9.5 + 0,5 H12/H13/H14...
Open the catalog to page 2All ALRO catalogs and technical brochures
Primary Aluminium Ingots2 Pages
Tread Plates2 Pages
Plates2 Pages
Embossed Sheets and Coils2 Pages
Aluminium Extruded Profiles2 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.