Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. ALRO
  3. Plates

Plates

Plates
1 / 2 PagesView full catalog

Plates

Product catalog summary
Product Specifications:
Vimetco Trading Srl offers aluminium and aluminium alloy plates in various alloys including 1xxx, 2xxx, 3xxx, 5xxx, 6xxx, and 7xxx. The thickness ranges from 6.3 mm to 300 mm, with standard widths between 900 mm and 1550 mm, and lengths from 1000 mm to 6000 mm.
Special Requests:
Half commercial tolerances on thickness can be guaranteed upon request. High magnesium aluminium alloy plates (5083, 5086, 5456) are available in H321 and H116 tempers for marine applications. Plates up to 150 mm thick can be delivered in mill finish or with a brushed surface.
Technical Conditions:
Options include plates cut to final dimensions, ink jet marking, and compliance with Aluminium Association Standards or ASTM. Plates from certain alloys can be certified by Bureau Veritas, Germanischer Lloyd, or Det Norske Veritas.
Packaging and Delivery:
Options include wooden pallets, steel/PVC straps, waterproof packing, and protective coatings. A PVC protective coating is available upon request, with a thickness of 70 µm.
Alloy Dimensions:
Soft & Medium Alloys and Hard & Hard Duty Alloys are available in various dimensions, with specific thickness, width, and length ranges provided for each alloy group.
See more

Catalog excerpts

Plates-1

Processed Products Alloys Thickness Standard Width Standard Length Vimetco Trading Srl Rivergate Center No. 64 Splaiul Unirii 040036 Bucharest, Romania Phone +40 750 067 314 Fax +40 21 408 35 82 [email protected] www.vimetco.com

 Open the catalog to page 1
Plates-2

Aluminium and Aluminium Alloys Aluminium Soft & Medium Alloys Hard & Hard Duty Alloys Technical conditions Options available: Plates cut (sawed or milled) to final length and width; ink jet continuous marking according to Aluminium Association Standards, ASTM or as per customer request, marked by labelling or stenciling; neutral paper interleaved; other requirements according to relevant quality standards. Plates from 5083, 5754, 5052 alloys may be delivered with Bureau Veritas, Germanischer Lloyd or Det Norske Veritas certificates, produced according to their respective rules. Packaging and...

 Open the catalog to page 2

All ALRO catalogs and technical brochures

  1. Primary Aluminium Ingots
    Primary Aluminium Ingots

    2  Pages

  2. Aluminium and Aluminium Alloy Slabs
    Aluminium and Aluminium Alloy Slabs

    2  Pages

  3. Alclad and Brazing Sheets and Strips
    Alclad and Brazing Sheets and Strips

    2  Pages

  4. Standard Flat Rolled Products
    Standard Flat Rolled Products

    4  Pages

  5. Tread Plates
    Tread Plates

    2  Pages

  6. Billets of Primary Aluminium Alloys
    Billets of Primary Aluminium Alloys

    2  Pages

  7. Primary Aluminium Wire Rod
    Primary Aluminium Wire Rod

    2  Pages

  8. Embossed Sheets and Coils
    Embossed Sheets and Coils

    2  Pages

  9. Aluminium Extruded Profiles
    Aluminium Extruded Profiles

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.