Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. ALRO
  3. Billets of Primary Aluminium Alloys

Billets of Primary Aluminium Alloys

Billets of Primary Aluminium Alloys
1 / 2 PagesView full catalog

Billets of Primary Aluminium Alloys

Product catalog summary
Product Overview: The document details the specifications and standards for billets of primary aluminium alloys, specifically alloys 6005, 6060, 6061, 6063, and 6082. These billets are available in diameters ranging from 6 to 13 inches (152 to 330 mm) and a maximum length of 6000 mm. They undergo homogenized heat treatment.
Chemical Composition: The chemical composition of the alloys is specified according to EN 573-3:2007 standards, with specific mass percentage ranges for elements like Silicon (Si), Iron (Fe), Copper (Cu), Manganese (Mn), Magnesium (Mg), Chromium (Cr), Zinc (Zn), and Titanium (Ti). The analysis method used is optical emission as per ASTM E 1251-07.
Dimensions and Tolerances: The document provides detailed dimensions and tolerances for the billets. Diameter tolerances are specified as +0/-2 mm for diameters 152 to 178 mm and +0/-3 mm for diameters 203 to 330 mm. Length tolerance is ±10 mm, with deflection less than 2 mm/m and less than 12 mm for the total length of 6000 mm.
Packaging: Each bundle of billets is strapped onto three grooved and wedged hardwood spacers and secured with five steel bands. Standard dimensions for the spacers are 75 mm x 75 mm x 815 mm.
Delivery Options: Delivery can be performed under various terms including FCA Slatina, FOB, DAF, DDU, DDP, CIF, or CIP.
Certifications: The company holds certifications including OHSAS 18001, ISO 14001, and ISO 9001, ensuring compliance with occupational health, environmental, and quality management standards.
See more

Catalog excerpts

Billets of Primary Aluminium Alloys-1

Alloy Diameters Max. length Heat Treatment

 Open the catalog to page 1
Billets of Primary Aluminium Alloys-2

Chemical composition - according EN 573-3:2007 in Mass % Others Al Mg Cr Ni Zn Ti Ga V Each Total rest rest rest rest rest Remark: two numbers mean the highest and lowest limits one number means the maximum value. Analysis method: optical emission as per ASTM E 1251-07. + 0/-3 Deflection less than 2 mm/m and less than 12 mm for the total length of 6.000 mm. Special request Tighter limits for alloying elements can be arranged on request. Packaging Each bundle is strapped onto three grooved and wedged hard wood spacers and secured with five steel bands. Standard dimensions for the grooved hard...

 Open the catalog to page 2

All ALRO catalogs and technical brochures

  1. Primary Aluminium Ingots
    Primary Aluminium Ingots

    2  Pages

  2. Aluminium and Aluminium Alloy Slabs
    Aluminium and Aluminium Alloy Slabs

    2  Pages

  3. Alclad and Brazing Sheets and Strips
    Alclad and Brazing Sheets and Strips

    2  Pages

  4. Standard Flat Rolled Products
    Standard Flat Rolled Products

    4  Pages

  5. Tread Plates
    Tread Plates

    2  Pages

  6. Primary Aluminium Wire Rod
    Primary Aluminium Wire Rod

    2  Pages

  7. Plates
    Plates

    2  Pages

  8. Embossed Sheets and Coils
    Embossed Sheets and Coils

    2  Pages

  9. Aluminium Extruded Profiles
    Aluminium Extruded Profiles

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.