iFeJUNGFALK Member of ellsefe GROUP

Today it's parcels, tomorrow flat screen TVs and then refrigerators. Up until now, some goods could not have been transported safely with just one load restraint system. And let's face it, some goods have to be accessible at all time. With TransSAFE®rack and just a few hand movements you have a flexible and easy to install textile shelf system in your transporter. It's exactly where you need it at all times! Installation time and empty runs are reduced to an absolute minimum. Additionally, the shoring beams and nets are light-weight and have little to no effect on your payload. Suitable for securing:...

Securing of freight ® rack | with textile shelfs in transporter General information TransSAFE® rack is a textile shelf system consisting of shoring elements and nets. The load is secured to the front and rear by nets which are attached to six KIM 5x7 Airline shoring beams. The KIMs are positioned as close to the front, rear and center as possible. The shoring beams are tightly fixed into roof and floor tracks. } Floor- and sidewall tracks Airline track with flange The floor track is preferably fixed by professional bonding and additional screws to the body of the vehicle. Because of this, the...

Shoring beams The shoring beams won’t twist within the Airline track. They allow flexibility due to the Airline milling along the sides of the beam. Each shoring beam has a blocking capacity of 650 daN (BC). This enables positive locking even for heavy loads. } TransSAFE®rack nets Textile shelves The nets are fixed to the KIMs and to the sidewalls. Due to the fact that the nets can be installed freely, the optimal usage of available space is guaranteed. Each net can be loaded with up to a maximum of 300 kg. } TransSAFE® rack straps Textile straps The straps are made of high tenacity polyester...

Airline tracks 100 - 6000 mm Airline roof tracks Order code Airline track standard rectangular

Starting point 2 - Starting point 3 - Mounting holes Order code If not indicated otherwise, the starting dimension is X = 0 mm, pitch P = 25,0 mm. P-xx TRANSPORTER Mounting holes Order code 4 - Ends 5 - End cap / Track cover Please select the shape of the beginning of the track (max. radius or max. F2 = half of track width in mm) A / E - straight A / E - burred A / E - R-xx A / E - F1-xx F2-xx A / E - SH-xx SL-xx Track cover End caps Order code Plastic end caps. Only in combination with straight ended tracks (not compatible with 520377) Track cover (not compatible with 320643 and 520624) End...

Load restraint with textile shelves TransSAFE® rack set Order code 6 KIM 5x7 Airline shoring beams 7 nets, suitable for the respective vehicle type 8 TransSAFE® rack straps 1 anchor plate Suitable for Mercedes-Benz Sprinter and Volkswagen Crafter with a 3665 mm wheelbase and high roof (load area length 3265 mm). With sidewall tracks. Suitable for Mercedes-Benz Sprinter and Volkswagen Crafter with a 3665 mm wheelbase and high roof (load area length 4300 mm). With sidewall tracks. TransSAFE®rack is also available for further vehicle types. *) Please

illsaFe JUNGFALK

590436-11 ∙ We reserve the right to make changes ∙ 12.2016 allsafe JUNGFALK GmbH & Co. KG Gerwigstraße 31 D-78234 Engen Phone +49 (0)7733 5002-0 Fax +49 (0)7733 5002-47 E-Mail [email protected] www.allsafe-group.co