Member of ellsefe GROUP Load restraint at the touch of a button

Load restraint at the touch of a button Until now there has been no reliable and practicable load restraint system which has been especially developed for short trips where load restraint is needed between stops without wasting any time. With TransSAFE®go from allsafe JUNGFALK, a new chapter in load restraint has begun. Thanks to an innovative concept TransSAFE®go users enjoy daily benefits such as more efficiency, security and flexibility. This system also makes the drastic increase of road controls an absolute breeze. The heart of the system is an intelligent and centrally controlled drive...

Load restraint at the touch of a button General information TransSAFE®go is a motor controlled automatic net used for securing cargo. It secures loads at different heights automatically within the vehicle. } TransSAFE® go tie bars The fixation The net is attached to the specially designed gliders which run up and down in stable tie bars made of aluminum alloy. Keeping your load safe in the city streets or on the roughest roads. TransSAFE® go is certified by DEKRA as a load restraint system. } TransSAFE® go net The securing net The net is fixed at the tie bars and encloses the goods. The net was...

} TransSAFE® go control The center of intelligence Load securing happens automatically without any manual effort. Thanks to an intelligent central drive, the net is always in the right position after each and every single stop. You get the perfect fit for every load height. } Components inside the vehicle The installation scheme Tie bars for positioning Push button for securing/unlocking Push button for securing/unlocking Central drive controls Das herunterfahrende Netz kann jederzeit und in jeder Position gestoppt werden. Und bei längeren Pausen schaltet sich die Schlaffunktion automatisch ein...

Order code TransSAFE®go set includes: ■ mounted tie bars ■ TransSAFE®go net, custom-made for your vehicle make and model ■ central drive control, with its waterproof housing ■ mounting material for fixation of the tie bars to the pre-installed sidewall tracks (tracks are not included in the set) ■ cable harness and connection material for battery connection ■ small parts ■ DEKRA-certificate ■ assembly and instruction manual Technical data: ■ operating voltage: 12 Volt (under voltage shutdown at 11 Volt) ■ operating temperature: -30 to +80 °C ■ system weight: approx. 40 kg depending on the vehicle...

TransSAFE®go set Suitable for Mercedes-Benz Sprinter and Volkswagen Crafter with a wheelbase of 3665 mm and high roof 511248-10 (length of the load area 3265 mm) Suitable for Mercedes-Benz Sprinter and Volkswagen Crafter with a wheelbase of 4325 mm and high roof 511255-10 and normal rear overhang (length of the load area 4300 mm) Suitable for Mercedes-Benz Vito with a long wheelbase and normal roof with four tie bars 511248-45 (maximum length of the useable load area 2400 mm) Suitable for Fiat Ducato, Peugeot Boxer and Citroen Jumper with a wheelbase L2 and roof height H2 511248-15 (length of...

590428-11 ∙ We reserve the right to make changes ∙ 12.2016 allsafe JUNGFALK GmbH & Co. KG Gerwigstraße 31 D-78234 Engen Phone +49 (0)7733 5002-0 Fax +49 (0)7733 5002-47 E-Mail [email protected] www.allsafe-group.co