Member of ellsefe GROUP

Today food, flowers and textile rentals are being distributed on sorted and consigned roll containers from factories or logistic centers. The mobile racks allow for easy loading and unloading, but securing them can be a real challenge! With the JF System you can latch the roll container with a fitting on the side walls at any position. Securing is done with a few flicks of the wrist. Suitable for securing: ■ roll containers ■ cooling containers ■ shelves ■ flower racks 1 The roll containers can be loaded and secured to the right or left of the vehicle with a middle aisle being built roll containers...

roll containers JF system | Load restraint fordistribution vehicles in insulated and Description The system consists of allsafe Airline guide tracks and the KERL JF fittings which enable full adjustment to ensure positive locking for roll containers. Extra load restraint equipment is also available such as the KIM shoring poles, straps and fittings. } Airline guide track Adhesive Airline guide track for securing roll containers Advantages of adhesive Airline tracks: ◾ cost saving through adhesive technology ◾ mounting holes in Airline milling allows for exact fixation on wall with just a few...

Clamp fitting This new and improved clamp fitting is like no other, when it comes to blocking forces with its certified 500 daN loading capacity. With this masterpiece, roll containers can hold up to 1.000 kg towards the rear and up to 625 kg towards the front. Operation temperature: -30 to 80°C. Besides the three selectable widths, ◾ 25 mm (compatible with common roll containers used in the food and linen rental industries) ◾ 35 mm (compatible with common flower racks) ◾ 45 mm (compatible with common EURO-stillage on wheels) you have the choice of fittings that can be inserted anywhere in the...

Airline Guide track Length without end caps (100 to 7000 mm) 522020 Airline Guide track Length mm xxxx Starting point If not indicated otherwise, the starting point is X = 0 mm, and the pitch is P = 25,0 mm. Mounting holes Please select the type of mounting holes (S = Countersunk screw, N = Countersunk rivet, D = Cylindric hole, M = Internal thread) a2 = same pitch a2 - a... = individual pitch Please specify the pitch of the mounting holes a1 and a2 Please specify the pitch of the mounting holes a1, a2, a3, a4 etc. a1-xx / a2-xx Two-piece tack and JF milled-out section Please choose the division...

Order code For roll containers with bars 512014 For roll containers with bars up to 35 mm Load capacity: 500 daN 35 mm For roll containers with bars up to 45 mm Load capacity: 500 daN 45 mm Order code jusa: mm For roll containers with bars 512017 For roll containers with bars up to 35 mm Load capacity: 500 daN 35 mm For roll containers with bars up to 45 mm Load capacity: 500 daN 45 mm Order code For roll containers with bars 512016 Load capacity: 0 daN in track direction 25 mm For roll containers with bars up to 35 mm Load capacity: 0 daN in track direction 500 daN in y-direction For roll containers...

system | Cssr* Securing roll containers in the middle aisle Order code Adjustment range possible from min. 400 to max. 2510 mm, with a fixed 70 mm range of spring. Internal dimension xxxx mm Compatible with 0 20 mm Airline, 0 20 mm round hole and 0 8 mm pin tracks 19 mm bolt Product identification sticker fit Customized product label with your logo Custom sticker Product label allsafe sticker Load protection Protector Without load protection Protector Without protection } Sample order code KIM 55 - 2480 - 19 mm bolt - allsafe sticker - Protector

25 mm lashing straps End fitting (different end fitting for loose and fixed end available) Lock Lmin means the minimal length of the fixed end. Order code LC 650 daN, STF 200 daN silver passivated: 360 013-10 yellow passivated: 77 036 Colour / Length grey: 71 057; black: 71 863 Not all colours are available for each lock Total length Total length Fixed end length Total length in mm For minimum length of fixed end: see end fitting description. Fixed lengths of 300 mm and above are no problem. Strap print Your individual print on the label Label print ► Sample order code 511263 illsaFe JUNGFALK

590486-11 ∙ We reserve the right to make changes ∙ 12.2016 allsafe JUNGFALK GmbH & Co. KG Gerwigstraße 31 D-78234 Engen Phone +49 (0)7733 5002-0 Fax +49 (0)7733 5002-47 E-Mail [email protected] www.allsafe-group.co