CONFIGURATOR BOX VAN
60Pages

CONFIGURATOR BOX VAN Load restraint Made in Germany Custom-made load restraint systems

AJS-System CTD-System CRS-System ContentsSystems for box vans JF-System page 4 ATD-System page 12 page 28 page 36 page 46

allsaFeMember of allsafe GROUP SICHERHEIT MADE IN GERMANY

Safety ■ positive locking load restraint - certified safety ■ best practice - goods produced with tried and tested processes ■ weight optimized products for law conformant security ■ allsafe systems deliver extra stability to vehicle body Brand name products ■ superior reliability - Made in Germany ■ proven safety through dynamic road tests with full loads ■ extensive endurance tests guarantee long life performance ■ 2 year product guarantee with inspection manual and speedy spare parts service. User-friendly ■ easy-to-use products with an ergonomic design ■ ready-to-install systems with...

No matter what you are transporting – at allsafe you will find a system which suits your needs. With just a few details about your vehicle and transport purpose, we can configure your individual system. The QR-Code leads you to the respective assembly and installation manuals. You’re already using one of our systems? Then we’d be happy to hear your ideas and challenges. That is how new and even better system solutions are generated. With our senior engineers and a modern production site in Engen, Germany you can expect quick and individual reactions to your demands. Challenge us – we can do...

Today food, flowers and textile rentals are being distributed on sorted and consigned roll containers from factories or logistic centers. The mobile racks allow for easy loading and unloading, but securing them can be a real challenge! With the JF-system you can latch the roll container with a fitting on the side walls at any position. Securing is done with a few flicks of the wrist. Suitable for securing: ■ roll containers ■ cooling containers ■ shelves ■ flower racks 1 The roll containers can be loaded and secured to the right or left of the vehicle with a middle aisle being built. Roll...

Load restraint for roll containers JF-system | in insulated and distribution vehicles Description The system consists of allsafe Airline guide tracks and the KERL JF fittings which enable full adjustment to ensure positive locking for roll containers. Extra load restraint equipment is also available such as the KIM shoring poles, straps and fittings. } Airline guide track Adhesive Airline guide track for securing roll containers Advantages of adhesive Airline tracks: ◾ cost saving through adhesive technology ◾ mounting holes in Airline milling allows for exact fixation on wall with just a...

Clamp fitting This new and improved clamp fitting is like no other, when it comes to blocking forces with its certified 500 daN loading capacity. With this masterpiece, roll containers can hold up to 1.000 kg towards the rear and up to 625 kg towards the front. Operation temperature: -30 to 80°C. Besides the three selectable widths, ◾ 25 mm (compatible with common roll containers used in the food and linen rental industries) ◾ 35 mm (compatible with common roll containers used for flower racks) ◾ 45 mm (compatible with common EURO-stillage on wheels) you have the choice of fittings that can...

Airline Guide track Length without end caps (100 to 7000 mm) 522020 Airline Guide track Length xxxx mm Starting point 2 - Starting point 3 - Mounting holes 4 - Division & milled-out 5 - Ends Order code e.g.: X = 0 mm e.g.: X = 25 mm e.g.: P = 25 mm e.g.: P = 50 mm If not indicated otherwise, the starting point is X = 0 mm, and the pitch is P = 25,0 mm. Mounting holes Select the type of mounting holes (S = Countersunk screw, N = Countersunk rivet, D = Cylindric hole, M = Internal thread, FB = Step drilling) Select the shape of the beginning of the track (max. radius or max. F2 = half of...

Order code For roll containers with bars 512014 For roll containers with bars up to 35 mm Load capacity: 500 daN 35 mm For roll containers with bars up to 45 mm Load capacity: 500 daN 45 mm Order code KERLJF fix Order code For roll containers with bars 512017 For roll containers with bars up to 35 mm Load capacity: 500 daN 35 mm For roll containers with bars up to 45 mm Load capacity: 500 daN Order code ► Sample order code For roll containers with bars 512016 Load capacity: 0 daN in track direction 25 mm 500 daN in y-direction For roll containers with bars 512016 0 daN in track direction...

Securing roll containers in the middle aisle KIM 55 Length 1 - Length Adjustment range possible from min. 400 to max. 2510 mm, with a fixed 70 mm range of spring. Internal dimension xxxx mm End pieces Product identification sticker / Custom sticker Product label allsafe sticker Load protection Sample order code KIM 5'5'

25 mm lashing straps End fitting (different end fitting for loose and fixed end available) Order code Lock Lmin means the minimal length of the fixed end. LC 400 daN, STF 195 daN Yellow passivated: 71 234; Blue powder coated: 560 438-10 Not all colours are available for each lock Total length Total length For minimum length offixed end: see end fitting description. Fixed lengths of 300 mm and above are no problem. Strap and label printing Sample order code ^112^ - 710^8 - 712^i - Olive- - 38OO - iOO - S+rap print 25 mm lashing End fitting Lock Colour Total length Fixed end length Strap...

The ATD double-deck system optimizes how you use your space and is also suitable for securing loads in box vans. Its second level makes it ideal for transporting loads of different heights, as well as goods that cannot be stacked. The beam function is selected so that the loading beam can be moved upwards in 25 mm increments yet can still be securely locked in position. The pallets are simply placed on the loading beams. When not in use, the beams can be stowed under the roof to save space. ■ loading on a second level 1 Beams can easily be stowed under the roof to save space. 2 Select the...

The ATD-system | beamnew generation Description The ATD double-deck-system optimizes how you use your space and is suitable for securing loads in box vans. Its second level makes it ideal for transporting loads of different heights as well as goods that cannot be stacked. } ATD-I Airline tracks ATD-I tracks for gluing and screwing in place } ATD-II Airline tracks ATD-II tracks for flush insertion into the side wall } ATD-F Airline tracks ATD-F tracks for insertion into the side wall with flange Double and single tracks are available in a number of variations. Depending on the task and the...